Messages 17xx
00:
Re: raith free from now till 8pm
(
SangBum Kim)
01:
Re: raith free from now till 8pm
(
Yiyang Gong)
02:
raith free until 2:30
(
SangBum Kim)
03:
raith free till 6pm
(
Brian Gierhart)
04:
Raith time released from 19:30 to 21:30 tonight.
(
Guangyu Zhang)
05:
raith finish early, next user may come now
(
Xinran Wang)
06:
Raith free from 3pm-5pm
(
Guangyu Zhang)
07:
raith free from 2:00PM tp 4:00PM
(
SangBum Kim)
08:
Raith down
(
Guangyu Zhang)
09:
Raith free Thursday 2-6pm
(
Hung-Tao Chou)
10:
system stabilizing
(
Dick Crane)
11:
Raith ready for next user
(
Ryan Tu)
12:
Raith finished earlier, ready for next user
(
Guangyu Zhang)
13:
Raith down
(
Guangyu Zhang)
14:
System is coming bacl up and I wish to work with you on your RAITH session today..
(
James Conway)
15:
Re: Shutdown raith SNF 2006-09-08 16:37:43: sample can't be unloaded
(
James Conway)
16:
User whom threw the High Voltage Knife switch to the power on the RAITH:: please see me during my office hour.
(
James Conway)
17:
Re: System is coming bacl up and I wish to work with you on your RAITH session today..
(
Li Zhang)
18:
Re: System is coming bacl up and I wish to work with you on your RAITH session today..
(
James Conway)
19:
Re: Raith Lithography training course and workshops 2006 in Dortmund, Germany
(
James Conway)
20:
raith is ready for the next user now
(
Shu-Jen Han)
21:
oops- raith free now to 2pm
(
Mark Topinka)
22:
raith free til 6pm
(
Hung-Tao Chou)
23:
slot open thurs at 9
(
Ilya Fushman)
24:
Comment raith SNF 2006-09-12 17:41:12: Users requested to report their EBL results to raith@snf.stanford.edu
(
James Conway)
25:
Re: raith ok for 30kV?
(
James Conway)
26:
Comment raith SNF 2006-09-13 17:34:21: excellent stitching and resolution on qualification test 9112006
(
James Conway)
27:
Raith free 10am-3pm tomorrow
(
Bryan Ellis)
28:
Re: Raith free 10am-3pm tomorrow
(
James Conway)
29:
Comment raith SNF 2006-09-15 10:25:03: 120 um Gun alignment out of specification.
(
James Conway)
30:
Re: RAith Session Today
(
James Conway)
31:
Moved Sat reservation to Wed
(
Onur Kilic)
32:
Raith free from now to 8pm
(
Hemanth Jagannathan)
33:
Raith free 8am-11am tomorrow
(
Hung-Tao Chou)
34:
Shutdown raith SNF 2006-09-19 16:06:22: RAITH System off line for BAKE OUT OF GUN. Previous water flow problems vented system chamber. elevated Gun pressures observed
(
James Conway)
35:
Raith system continues down time Zeiss was unable to come in today.
(
James Conway)
36:
Raith Update :: System will remain down and out of service through Monday afternoon.
(
James Conway)
37:
Stanford RAITH 150 EBL system will continue to be down. Please remove and reschedule coral reservations through THURSDAY 6 PM.
(
James Conway)
38:
James Conway will be away from SNF Friday through Monday 10-09-06
(
James Conway)
39:
FAQ NO 6: HOW to get help on the RAITH System during your session -- "Who are your gonna call"
(
James Conway)
40:
Raith Status Monday Oct 09 -- SYSTEM CONTINUES IN SHUT DOWN.
(
James Conway)
41:
Reminder: 'Take a Spin with Me' E-beam resist handling training on the Headway. 1:00 - 4:00 PM
(
James Conway)
42:
Raith status:: System returning to service, qualification tomorrow afternoon after run in FE-Gun.
(
James Conway)
43:
Raith Status Friday the 13th 9 AM: System coming back up after downtime and repairs. Please read me...
(
James Conway)
44:
Re: Raith status:: System returning to service... Old RAITH PC Question -- No files lost
(
James Conway)
45:
ZEP-520A Out of Stock -- but we have 1:1 ZEP-520A to Anisole.
(
James Conway)
46:
MaN-2403 should be received 10 -23- 06
(
James Conway)
47:
RAITH Basics Users class will be moved back three weeks due to recent downtime on the RAITH tool to November 7 to 10th 2006.
(
James Conway)
48:
SUNDAY 6 AM to 12 Noon is now open for any qualified Raith User.
(
James Conway)
49:
RAITH is up and available to all qualified Users.
(
James Conway)
50:
Raith imaging had a problem, now solved
(
Shinichi Koseki)
51:
RAITH STATUS 11 AM MONDAY -- New PC installation tomorrow.
(
James Conway)
52:
Shutdown raith SNF 2006-10-17 12:07:36: New computer does not hav all confguration or drivers on the PC]
(
James Conway)
53:
Problem raith SNF 2006-10-17 17:24:50: Piezo and height control modules not enabled -- OK to write by most users
(
James Conway)
54:
Problem raith SNF 2006-10-17 17:24:50: Piezo and height control modules not enabled -- OK to write by most users
(
by way of Paul Rissman <rissman.stanford.edu)
55:
raith free 3-7p tomorrow
(
Shu-Jen Han)
56:
RAITH STATUS 1 PM Thursday
(
James Conway)
57:
Raith free 8am-1pm Fri (tommorow)
(
Brian Gierhart)
58:
Please return all Software dongles for the RAITH Off line SW
(
James Conway)
59:
Re: Comment raith SNF 2006-10-19 18:25:29: system is up and functional NOT TO EXCEED 10 KV
(
James Conway)
60:
RAITH STATUS FRIDAY 2 PM -- SYSTEM OPERATION NORMAL NO CURRENT PROBLEMS OUTSTANDING
(
James Conway)
61:
MaN 2403 resist resin has been received and is in the lab. Contact James for location... JWC
(
James Conway)
62:
Re: RAITH STATUS FRIDAY 2 PM -- SYSTEM OPERATION NORMAL NO CURRENT PROBLEMS OUTSTANDING]
(
James Conway)
63:
raith is free til 6pm now
(
Hung-Tao Chou)
64:
Fifth Annual National Nanotechnology Seminar Hosted by Hitachi High Technologies America
(
James Conway)
65:
reservation deleted 6:30-9pm today
(
Lindsay Moore)
66:
running late -I will want my RAITH session - in in 10 minutes - JWC
(
James Conway)
67:
Deleting my RAITH reservation for JWC: November 03, 2006 10 -13:00 hours
(
James Conway)
68:
Raith Application Won't open
(
danny T)
69:
SPECIAL EBEAM LAB EVENT:"'3D EBL applications for UV Nano Imprint Lithography" Guido Piaszenski, Raith GmbH, Dortmund, DE. MONDAY NOV. 13 from 2 - 3 PM in CIS 101
(
James Conway)
70:
RAITH STATUS 2006-10-27 13:18:48: User can now operate system to not to exceed 20 kV
(
James Conway)
71:
RAITH STATUS NO. 2 SNF 2006-10-27 13:21:44: Piezo leveling post have been calibrated.
(
James Conway)
72:
done, RAITH free for next user
(
Arash Hazeghi)
73:
Raith Free, Experienced a Load Lock Error
(
S. Ekin Kocabas)
74:
ZEP-520A is 'in the House'..
(
James Conway)
75:
REMINDER: Please be careful when you start your Load Lock procedures.
(
James Conway)
76:
Doses for Quartz wafers?
(
James Conway)
77:
Honor thy reservations or loose access to RAITH tool.
(
James Conway)
78:
ANNOUNCEMENT: RAITH Group XXII -- Intensive 4 day short course. NOVEMBER 7 - 10, 2006 TUESDAY - FRIDAY 10 AM - 6 PM
(
James Conway)
79:
ANNOUNCEMENT: "Take A Spin with Me" -- Ebeam Resist Handling Training on the Headway. Tuesday November 14, 2006 10:00 - 13:00
(
James Conway)
80:
Removed Reservation Wed 5-9am
(
Venkatesh Chembrolu)
81:
done earlier, raith is free til 1pm
(
Hung-Tao Chou)
82:
JWC finished earlier than expected -- system is now available.
(
James Conway)
83:
I expect my exposure to complete about 19:10 hours or before.
(
James Conway)
84:
RAITH Status UPDATE Thursday Nov. 2, 2006-- Restrictions on acceleration voltage raised to: not to exceed 25 keV acceleration voltage.
(
James Conway)
85:
raith done earlier
(
Yuan Zhang)
86:
Raith reservation released from 8:30-12:00 tonight
(
Guangyu Zhang)
87:
Raith done early
(
Dmitry Alexander Kozak)
88:
ANNOUNCEMENT No. 2: RAITH Group XXII -- Intensive 4 day short course. NOVEMBER 7 - 10, 2006 TUESDAY - FRIDAY 10 AM - 6 PM
(
James Conway)
89:
REMINDER: RAITH Group XXII -- Intensive 4 day short course. NOVEMBER 7 - 10, 2006 TUESDAY - FRIDAY 10 AM - 6 PM Need a laptop!
(
James Conway)
90:
2nd ANNOUNCEMENT: "Take A Spin with Me" -- Ebeam Resist Handling Training on the Headway. Tuesday November 14, 2006 10:00 - 13:00
(
James Conway)
91:
SPECIAL EBEAM LAB EVENT:"'3D EBL applications for UV Nano Imprint Lithography" Guido Piaszenski, Raith GmbH, Dortmund, DE. MONDAY NOV. 13 from 2 - 3 PM in CIS 101
(
James Conway)
92:
Raith free 5-10am
(
Venkatesh Chembrolu)
93:
our write may be finished earlier than expected we will not need the additional time available
(
James Conway)
94:
cancelled res
(
Ilya Fushman)
95:
REMINDER MONDAY NOV. 13 from 2 - 3 PM in CIS 101: EBEAM LAB EVENT:"'3D EBL applications for UV Nano Imprint Lithography" Guido Piaszenski, Raith GmbH, Dortmund, DE.
(
James Conway)
96:
2nd ANNOUNCEMENT: "Take A Spin with Me" -- Ebeam Resist Handling Training on the Headway. Tuesday November 14, 2006 10:00 - 13:00
(
James Conway)
97:
Notice on reports of differences in the 5% 950K PMMA -A spin thicknesses.
(
James Conway)
98:
ZEP-520A found in solvent cabinet this morning. Must be refrigerated!
(
James Conway)
99:
SPECIAL EVENT TODAY:"'3D EBL applications for UV Nano Imprint Lithography" Guido Piaszenski, Raith GmbH, Dortmund, DE. MONDAY NOV. 13 from 2 - 3 PM in CIS 101
(
James Conway)