Subject: [Fwd: Problem raith SNF 2005-08-10 14:21:09: Someone used epoxy or corrosive materials on STD. SAMPLE HOLDER!!!]
From: James Conway <jwc@snf.stanford.edu>
Date: Wed, 10 Aug 2005 17:31:35 -0700

SEE message below
Users working with pieces should exercise caution that their samples can be loaded flat onto the sample holder.
I will look further into this issue tomorrow.

Thank you,

JWC


-------- Original Message --------
Subject: Problem raith SNF 2005-08-10 14:21:09: Someone used epoxy or corrosive materials on STD. SAMPLE HOLDER!!!
Date: Wed, 10 Aug. 2005 14:21:10 -0700
From: jwc@snf.stanford.edu
To: raith-pcs@snf.stanford.edu


Attention RAITH Users:
Will the user whom used conductive epoxy or other adhesives to mount their small pieces to the Std. Sample Holder:
PLEASE SEE ME IMMEDIATELY!

Evidently a User working with small pieces on positions 1 outer, two inner, both three inner and outer, and five outer on the STD. SAMPLE HOLDER
 employed either conductive epoxy, or a corrosive residue on the wafer backside, which has left residues which I cannot remove with normal solvents!
The result is that wafers and all pieces now cannot be mounted level onto the sample holder.
This is very poor behavior to the RAITH community; likely we have to replace the standard sample holder. 

James Conway 08102005:14:25
If you were that user or know whom this might be -- please contact me immediately or during my office hour.