Subject: New Thread Name ---> communication with the column control computer not possible,please check the connection and retry...
From: "James W. Conway" <jwc@snf.stanford.edu>
Date: Wed, 21 Sep 2011 09:15:15 -0700

This was an issue of TCP/IP not being employed for communications between computers, as we are running communications across the ports using REMCON instead of TCP/IP protocols.
I hope to have this resolved very soon...

James

On 9/20/2011 5:48 PM, Taka Kodama wrote:

Hi James,

Thanks for the notice. I missed your comment and I did not launch another server software in the SEM PC before starting raith program. So, I could solve the issue and the system is working very well without any problem.

Thanks,

Takashi

2011/9/20 James W. Conway <jwc@snf.stanford.edu>
I think if you go to user defaults on login it will fix the problem.

I will be on the system working with Arka M starting at 10 AM and will be able to take a look at settings...

JWC

On 8/27/2011 4:52 PM, Takashi Kodama wrote:
Hi James,

I encounter new problem. When I start the raith software with my account (kodama),
The following message was popped up and it seems the communication error.

communication with the column control computer not possible
please check the connection and retry

Does it a common problem for all user or only my account?
Because I suspect that you performed any changes after last Thursday afternoon and it has not been reflected to my account.
I started SEM software first and I restarted both PC once. But I could not solve the problem.
I hesitate to initialize my account because you helped me to setup my file on last Thursday.
Please let me know if you have any idea for this issue.

Thanks,

Takashi Kodama
kodama@stanford.edu



--
Dr. Takashi Kodama
Department of Mechanical Engineering
Stanford University
http://www.stanford.edu/~kodama/index.html
kodama@stanford.edu
tkodama@snf.stanford.edu
taka.kodama@gmail.com