Subject: Re: Repeated load lock errors
From: Jason Ryan <jason.ryan@stanford.edu>
Date: Mon, 2 Jul 2012 15:13:18 -0700
Mon, 2 Jul 2012 15:13:18 -0700
Thanks, everyone. By following the advice from various raith users and
pressing the red reset button on the turbo pump as in the RAITH FAQ No.1,
all is well.

On Mon, Jul 2, 2012 at 2:42 PM, Jason Ryan <jason.ryan@stanford.edu> wrote:

> Hi all,
>
> Even after applying pressure to the load lock door, RAITH was unable to
> pump down load lock on unloading.
>
> Error reads: It is not possible to pump the loadlock !
>
> Let me know if there is something I can do to get back to normal
> operation. Apologies if it's my fault!!
>
> --
> Jason Ryan
>
> *Ph.D. Candidate*
> *Hesselink Group*
> *Department of Electrical Engineering, Stanford University*
> *Clothing Manager
> *
> *Stanford Cycling*
>
>


-- 
Jason Ryan

*Ph.D. Candidate*
*Hesselink Group*
*Department of Electrical Engineering, Stanford University*
*Clothing Manager
*
*Stanford Cycling*


Thanks, everyone. By following the advice from various raith users and pressing the red reset button on the turbo pump as in the RAITH FAQ No.1, all is well.

On Mon, Jul 2, 2012 at 2:42 PM, Jason Ryan <jason.ryan@stanford.edu> wrote:
Hi all,

Even after applying pressure to the load lock door, RAITH was unable to pump down load lock on unloading.

Error reads: It is not possible to pump the loadlock !

Let me know if there is something I can do to get back to normal operation. Apologies if it's my fault!!

--
Jason Ryan

Ph.D. Candidate
Hesselink Group
Department of Electrical Engineering, Stanford University
Clothing Manager
Stanford Cycling




--
Jason Ryan

Ph.D. Candidate
Hesselink Group
Department of Electrical Engineering, Stanford University
Clothing Manager
Stanford Cycling