Subject: ZEP - 520 - 12 stock has been received.
From: James Conway <jwc@snf.stanford.edu>
Date: Mon, 25 Oct 2004 15:05:06 -0700
Mon, 25 Oct 2004 15:05:06 -0700
Greetings Ebeam Users:

After several delays and some snafu's with SU purchasing  we are now 
restocked with the ZEP - 520 - 12 resist.

We will be keeping this material locked up and will check it out 
directly to users for use at the time of need.

The material is very expensive and all users are instructed to be frugal 
with this material to keep waste to a minimum.
It cost about $15.00 per ml.

This material is also very sensitive to moisture and must be stored 
under  refrigeration. You must allow 30 minutes or more to allow the 
material to reach lab temperature BEFORE you open the bottle. 

This material should be handled with syringes to get the best results 
and cannot be used on the track systems.

If you desire to work with this material please see James Conway during 
his daily office hour.

Thank you,

James Conway





Greetings Ebeam Users:

After several delays and some snafu's with SU purchasing  we are now restocked with the ZEP - 520 - 12 resist.

We will be keeping this material locked up and will check it out directly to users for use at the time of need.

The material is very expensive and all users are instructed to be frugal with this material to keep waste to a minimum.
It cost about $15.00 per ml.

This material is also very sensitive to moisture and must be stored under  refrigeration. You must allow 30 minutes or more to allow the material to reach lab temperature BEFORE you open the bottle. 

This material should be handled with syringes to get the best results and cannot be used on the track systems.

If you desire to work with this material please see James Conway during his daily office hour.

Thank you,

James Conway