From klohner at snf.stanford.edu Wed Jul 21 16:22:22 2004 From: klohner at snf.stanford.edu (klohner at snf.stanford.edu) Date: Wed, 21 Jul 2004 16:22:22 -0700 Subject: Shutdown afm2 SNF 2004-07-21 16:22:21: lamp light source burned out Message-ID: It appears to me that the microscope lamp light source burned out a couple of hours into my AFM use. Needs to be fixed/replaced. Thank you From cbellew at att.net Wed Jul 21 19:59:22 2004 From: cbellew at att.net (cbellew at att.net) Date: Thu, 22 Jul 2004 02:59:22 +0000 Subject: Shutdown afm2 SNF 2004-07-21 16:22:21: lamp light source burned out Message-ID: <072220040259.15997.40FF2D85000A41FD00003E7D2160281302990A04040A0D0C@att.net> I just wanted to give a heads up about a problem that I previously had with the microscope lamp. A user reported that the lamp was burnt out but the problem was actually with the rotary dimmer control being loose and grounding out on the housing. I have no idea if this is the problem this time but if it isn't the bulb, you may want to check the dimmer. Colby -------------- Original message from klohner at snf.stanford.edu: -------------- > It appears to me that the microscope lamp light source burned out a couple of > hours into my AFM use. Needs to be fixed/replaced. Thank you > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vilanova at snf.stanford.edu Thu Jul 22 07:53:38 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 22 Jul 2004 07:53:38 -0700 Subject: Shutdown afm2 SNF 2004-07-21 16:22:21: lamp light source burned out Message-ID: Replaced lamp. From jimkruger at snf.stanford.edu Wed Jul 28 14:43:30 2004 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Wed, 28 Jul 2004 14:43:30 -0700 Subject: Problem afm2 SNF 2004-07-28 14:43:30: afm2 stage initialize fails Message-ID: From jykim at snf.stanford.edu Fri Jul 30 20:27:44 2004 From: jykim at snf.stanford.edu (jykim at snf.stanford.edu) Date: Fri, 30 Jul 2004 20:27:44 -0700 Subject: Comment afm2 SNF 2004-07-30 20:27:43: Does not engage sample correctly Message-ID: After focusing the tip with surface and engaging the head is not able to engage properly and overextends and breaks the tip.