From jykim at snf.stanford.edu  Sun May  8 00:02:04 2005
From: jykim at snf.stanford.edu (jykim at snf.stanford.edu)
Date: Sun, 8 May 2005 00:02:04 -0700
Subject: Problem afm2 SNF 2005-05-08 00:02:04: Need to replace bulb for the monitor
Message-ID: <mailman.116.1356280962.3333.afm2-pcs@snf.stanford.edu>

No more replacement bulbs



From vilanova at snf.stanford.edu  Mon May  9 07:46:36 2005
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Mon, 9 May 2005 07:46:36 -0700
Subject: Problem afm2 SNF 2005-05-08 00:02:04: Need to replace bulb for the monitor
Message-ID: <mailman.117.1356280962.3333.afm2-pcs@snf.stanford.edu>

Replaced Lamp ,  ok to use. 



From bleen at snf.stanford.edu  Tue May 10 11:50:43 2005
From: bleen at snf.stanford.edu (bleen at snf.stanford.edu)
Date: Tue, 10 May 2005 11:50:43 -0700
Subject: Problem afm2 SNF 2005-05-10 11:50:42: Alignment laser will not turn on
Message-ID: <mailman.118.1356280962.3333.afm2-pcs@snf.stanford.edu>

The tip alignment laser will not turn on regardless of the orientation of the head.
Brian



From vilanova at snf.stanford.edu  Tue May 10 14:24:40 2005
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Tue, 10 May 2005 14:24:40 -0700
Subject: Problem afm2 SNF 2005-05-10 11:50:42: Alignment laser will not turn on
Message-ID: <mailman.119.1356280962.3333.afm2-pcs@snf.stanford.edu>

Found loose laser wire, adjusted laser wire , ok to use. 



From gigi at snf.stanford.edu  Mon May 16 15:25:47 2005
From: gigi at snf.stanford.edu (gigi at snf.stanford.edu)
Date: Mon, 16 May 2005 15:25:47 -0700
Subject: Problem afm2 SNF 2005-05-16 15:25:46: focus height not calibrated
Message-ID: <mailman.120.1356280963.3333.afm2-pcs@snf.stanford.edu>

needs to be lower by a few ~100 microns.
Needs to be recalibrated.



From gigi at snf.stanford.edu  Mon May 16 15:26:32 2005
From: gigi at snf.stanford.edu (gigi at snf.stanford.edu)
Date: Mon, 16 May 2005 15:26:32 -0700
Subject: Problem afm2 SNF 2005-05-16 15:26:31: laser cable loose
Message-ID: <mailman.121.1356280963.3333.afm2-pcs@snf.stanford.edu>

the laser cable are loose, can be used, but it's annoying...



From vilanova at snf.stanford.edu  Tue May 17 10:57:01 2005
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Tue, 17 May 2005 10:57:01 -0700
Subject: Problem afm2 SNF 2005-05-16 15:26:31: laser cable loose
Message-ID: <mailman.122.1356280963.3333.afm2-pcs@snf.stanford.edu>

laser cable was not connected properly, becareful while taking
the laser head out . ok to use. 



From vilanova at snf.stanford.edu  Tue May 17 10:57:31 2005
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Tue, 17 May 2005 10:57:31 -0700
Subject: Problem afm2 SNF 2005-05-16 15:25:46: focus height not calibrated
Message-ID: <mailman.123.1356280963.3333.afm2-pcs@snf.stanford.edu>

Read  previous message.