AFM2

masatoi at stanford.edu masatoi at stanford.edu
Tue Feb 26 01:56:58 PST 2008


I did not change any parameters in my session on Monday and the tool was 
working fine. So, I am not sure why the problem happens, too.

Sorry for late reply,
Masato

"Shen Ren" <renshen at stanford.edu>:
> It seems like user "masato" might reconfigure the tool in his session 
early
> morning on Monday.
> 
> Masato, was the tool behaving normal during your session? If somehow 
you
> changed a parameter, could you please change it back for all the
> other users?
> 
> Ed, as the current problem is annoying to all the AFM users, it might 
be
> great if you can spend some of your valuable time to get it back. (I 
know
> you are busy..)
> 
> Shen
> 
> On Mon, Feb 25, 2008 at 7:23 PM, <chughes at caltech.edu> wrote:
> 
> >     Hello all. I also used the AFM today, and had the same 
experience as
> > Bei.
> >
> >     Cameron
> >
> > > When I used AFM yesterday, it worked fine. Tip is still in
> > > focus during engaging. However, this afternoon I got the
> > > problem you mentioned, which I am not sure why.
> > >
> > > Thank you,
> > > Bei
> > >
> > >
> > > ---- Original message ----
> > >>Date: Mon, 25 Feb 2008 11:02:20 -0800
> > >>From: "Jason Fu" <Jfu at exponent.com>
> > >>Subject: AFM2
> > >>To: <labmembers at snf.stanford.edu>
> > >>
> > >>Hi,
> > >>Sorry to send the message to the whole lab instead of only
> > > people using
> > >>AFM2. After spending almost an hour with Ed this morning on
> > > the machine
> > >>to figure out the optical microscope may have problem, just
> > > checking
> > >>with other AFM users in the lab to see if and when other
> > > people noticed
> > >>the same problem. The symptoms are: when engaging the tip,
> > > tip scanning
> > >>started and the tip image was NOT in focus shown on the
> > > monitor screen.
> > >>Since this problem has not been reported on Coral before,
> > > please let me
> > >>know if you are a AFM user and saw this recently.
> > > Especially for people
> > >>using AFM recently, please let me know if your scan looks
> > > normal. Users:
> > >>nppatil, libei, donghun, koba, munehiro, please reply.
> > >>
> > >>Appreciated your time and reply!
> > >>Thanks,
> > >>Jason
> > > ==============================
> > > Graduate Student
> > > QSL Lab.,EngrII 228
> > > Dept.of Electrical Engineering
> > > University of California
> > > Riverside, CA 92521
> > > Ph.# (951) 827-6275
> > > Fax# (951) 827-2425
> > > http://qsl.ee.ucr.edu/
> > > ==============================
> > >
> >
> >
> >
> 
> 
> -- 
> Best wishes,
> 
> Shen Ren
> 
> Department of Electrical Engineering
> Stanford University
> 
> 
> "The Chinese call luck opportunity and they say it knocks every day on 
your
> door. Some people hear it; some do not. It's not enough to hear 
opportunity
> knock. You must let him in, greet him, make friends and work together.
"
> - Bernard Gittelson
> 




More information about the afm2 mailing list