AFM2

Shen Ren renshen at stanford.edu
Tue Feb 26 02:14:11 PST 2008


OK. Then sorry for my last email. I was just curious.

Shen

On Tue, Feb 26, 2008 at 1:56 AM, <masatoi at stanford.edu> wrote:

> I did not change any parameters in my session on Monday and the tool was
> working fine. So, I am not sure why the problem happens, too.
>
> Sorry for late reply,
> Masato
>
> "Shen Ren" <renshen at stanford.edu>:
>  > It seems like user "masato" might reconfigure the tool in his session
> early
> > morning on Monday.
> >
> > Masato, was the tool behaving normal during your session? If somehow
> you
> > changed a parameter, could you please change it back for all the
> > other users?
> >
> > Ed, as the current problem is annoying to all the AFM users, it might
> be
> > great if you can spend some of your valuable time to get it back. (I
> know
> > you are busy..)
> >
> > Shen
> >
> > On Mon, Feb 25, 2008 at 7:23 PM, <chughes at caltech.edu> wrote:
> >
> > >     Hello all. I also used the AFM today, and had the same
> experience as
> > > Bei.
> > >
> > >     Cameron
> > >
> > > > When I used AFM yesterday, it worked fine. Tip is still in
> > > > focus during engaging. However, this afternoon I got the
> > > > problem you mentioned, which I am not sure why.
> > > >
> > > > Thank you,
> > > > Bei
> > > >
> > > >
> > > > ---- Original message ----
> > > >>Date: Mon, 25 Feb 2008 11:02:20 -0800
> > > >>From: "Jason Fu" <Jfu at exponent.com>
> > > >>Subject: AFM2
> > > >>To: <labmembers at snf.stanford.edu>
> > > >>
> > > >>Hi,
> > > >>Sorry to send the message to the whole lab instead of only
> > > > people using
> > > >>AFM2. After spending almost an hour with Ed this morning on
> > > > the machine
> > > >>to figure out the optical microscope may have problem, just
> > > > checking
> > > >>with other AFM users in the lab to see if and when other
> > > > people noticed
> > > >>the same problem. The symptoms are: when engaging the tip,
> > > > tip scanning
> > > >>started and the tip image was NOT in focus shown on the
> > > > monitor screen.
> > > >>Since this problem has not been reported on Coral before,
> > > > please let me
> > > >>know if you are a AFM user and saw this recently.
> > > > Especially for people
> > > >>using AFM recently, please let me know if your scan looks
> > > > normal. Users:
> > > >>nppatil, libei, donghun, koba, munehiro, please reply.
> > > >>
> > > >>Appreciated your time and reply!
> > > >>Thanks,
> > > >>Jason
> > > > ==============================
> > > > Graduate Student
> > > > QSL Lab.,EngrII 228
> > > > Dept.of Electrical Engineering
> > > > University of California
> > > > Riverside, CA 92521
> > > > Ph.# (951) 827-6275
> > > > Fax# (951) 827-2425
> > > > http://qsl.ee.ucr.edu/
> > > > ==============================
> > > >
> > >
> > >
> > >
> >
> >
> > --
> > Best wishes,
> >
> > Shen Ren
> >
> > Department of Electrical Engineering
> > Stanford University
> >
> >
> > "The Chinese call luck opportunity and they say it knocks every day on
> your
> > door. Some people hear it; some do not. It's not enough to hear
> opportunity
> > knock. You must let him in, greet him, make friends and work together.
> "
> > - Bernard Gittelson
> >
>
>


-- 
Best wishes,

Shen Ren

Department of Electrical Engineering
Stanford University


"The Chinese call luck opportunity and they say it knocks every day on your
door. Some people hear it; some do not. It's not enough to hear opportunity
knock. You must let him in, greet him, make friends and work together."
- Bernard Gittelson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/afm2/attachments/20080226/dafd1ec5/attachment.html>


More information about the afm2 mailing list