From kwankyup at stanford.edu Wed Jun 4 16:50:52 2008 From: kwankyup at stanford.edu (Kwan Kyu Park) Date: Wed, 4 Jun 2008 16:50:52 -0700 Subject: AFM program- Fwd: NanoScope offline software References: <6.2.5.6.2.20080603174720.02657cb0@stanford.edu> Message-ID: Dear AFM user. I have been looking for the AFM program to install in my laptop. I remember I downloaded installation program, but I lost it, when I formated by PC. If anybody have AFM program (NanoScope) installation file, which is v530r3sr3.exe, or is there any available third-party software to handle AFM data file? Thank you in advance. Regards, Kwan-Kyu Begin forwarded message: > From: Ed Myers > Date: June 3, 2008 5:49:01 PM PDT > To: Kwan Kyu Park > Subject: Re: Fwd: NanoScope offline software > > Kwan-Kyu, > > I did not down load the file and the file was put on the web only > for a very limited time. Some lab member use a third party free > ware, but I don't know what it is. > > Regards, > Ed > > At 01:25 AM 6/3/2008, you wrote: >> Dear Ed, >> >> I asked to my labmate to get a link of NanoScope program. >> I tried to get a software, however the ID and password does not work >> anymore. >> I think it would be much more convenient if I can install the >> NanoScope program in my desktop. >> >> If you have the installation file, can I stop by your office and ask >> the file? >> >> Thank you. >> >> Kwan-Kyu >> >>> >>> >>> >>> >>>>> -----Original Message----- >>>>> From: Ed Myers [mailto:edmyers at stanford.edu] >>>>> Sent: Friday, February 02, 2007 3:32 PM >>>>> To: Recipient list suppressed: >>>>> Subject: Fwd: NanoScope offline software >>>>> >>>>> >>>>>> Dear Ed, >>>>>> >>>>>> >>>>>> Feel free to distribute this software amongst the users in your >>>>>> group who are analyzing images captured with a NanoScope. >>>>>> >>>>>> >>>>>> V5.30r3sr3 OFFLINE SOFTWARE >>>>>> >>>>>> >>>>>> Although I have received feedback from customers that this >>>>>> software >>>>>> will run under Windows XP, please know that it is only designed >>>>>> to >>>>>> work running under Windows NT and Windows 2000. >>>>>> >>>>>> It has been determined that the system configuration to run this >>>>>> offline version of the NanoScope software should meet the >>>>>> following >>>>>> minimum requirements: >>>>>> >>>>>> * Pentium 300 Mhz processor, >>>>>> * 128MB RAM, >>>>>> * Microsoft Windows NT 4.0. >>>>>> >>>>>> >>>>>> HYPERLINK (easiest method for downloading) >>>>>> >>>>>> Using Netscape or MSIE as your default browser, you can >>>>> simply click >>>>>> on the hyperlink below and you will be prompted to download the >>>>>> file, "v530r3sr3.exe": >>>>>> ftp://software:007software at sboftp.veeco.com/versions/offline >>>>> /v530r3sr3.exe >>>>>> >>>>>> >>>>>> STANDARD FTP METHOD >>>>>> >>>>>> If you are using an ftp utility, you must enter the user ID, >>>>>> password, and the correct path and the file name in order to >>>>>> download the "v530r3sr3.exe. >>>>>> >>>>>> User ID: diftp >>>>>> Password: nano >>>>>> Path: public/outgoing/offline >>>>>> >>>>>> Use the "get" command to specify the "v530r3sr3.exe" file >>>>> for downloading. >>>>>> >>>>>> >>>>>> Please respect the integrity of this password information, as >>>>>> it is >>>>>> intended for your use only. >>>>>> >>>>>> INSTALLING THE PROGRAM ON YOUR SYSTEM >>>>>> Once you have downloaded this file you must double click on it to >>>>>> extract the contents to a folder. Open the folder you've just >>>>>> created and select setup.exe to install the NanoScope >>>>>> software. The software will then create a directory and >>>>> install the program. >>>>>> >>>>>> SINGLE MONITOR USE >>>>>> If you look at the Windows NT task bar after you start the >>>>>> program, >>>>>> you will see two NanoScope buttons. Right click on the one that >>>>>> says "control." Then select "Move." Your cursor should >>>>>> transform >>>>>> into a four position directional pointer. Then, use the arrow >>>>>> keys >>>>>> on your keyboard to move the control window into view (I >>>>> believe the >>>>>> left arrow key accomplishes this). Once the control window is in >>>>>> view, you can toggle between it and the image window by simply >>>>>> clicking on the desired screen. If the image screen proves to be >>>>>> too large to toggle between the two windows, try changing to a >>>>>> higher screen resolution, as this will make the window >>>>> sizes smaller. >>>>>> >>>>>> THERE IS NO ADDITIONAL PHONE OR WRITTEN SUPPORT PROVIDED FOR THIS >>>>>> FREE SOFTWARE >>>>>> This free software is intended to be loaded on a user-supplied >>>>>> computer. Digital Instruments is under no obligation to provide >>>>>> either technical support, or support documentation for the use of >>>>>> this software. >>>>>> >>>>>> SOFTWARE MANUALS ARE AVAILABLE FOR PURCHASE >>>>>> Contact your sales representative, or phone (800) 873-9750 >>>>>> >>>>>> Digital Instruments reserves the right to regulate the >>>>>> distribution >>>>>> of NanoScope offline or workstation software without notice >>>>>> >>>>>> >>>>>> Please respect the confidentiality of this password >>>>>> information, as >>>>>> it is intended for your use only. >>>>>> >>>>>> >>>>>> Regards, >>>>>> Software Configuration Coordinator >>>>> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From habimalm at rose-hulman.edu Tue Jun 24 13:47:40 2008 From: habimalm at rose-hulman.edu (Habimana-Griffin, LeMoyne M) Date: Tue, 24 Jun 2008 16:47:40 -0400 Subject: AFM in aqueous environment Message-ID: <4421F4786A6C034E9A0DFA0FAE77FB220156E09E@EVS3.rose-hulman.edu> I was wondering if anyone had a manual for the afm2. Also does anyone have a suggestion for the kind of tip I should use. I am trying probe surfactant self assemblies on the surface of MSSQ glass film. Thanks, LeMoyne Habimana-Griffin -------------- next part -------------- An HTML attachment was scrubbed... URL: