AFM2 Superusers- Second Request

Ed Myers edmyers at stanford.edu
Tue Jan 25 09:11:52 PST 2011


All,

This is the second request for lab members to step up and become AFM2 
super users.  The first request yielded no response, so hopefully 
that will change with the second request.

Regards,
Ed



>Date: Tue, 18 Jan 2011 15:13:44 -0800
>To: afm2 at snf.stanford.edu
>From: Ed Myers <edmyers at stanford.edu>
>Subject: AFM2 Superusers
>
>All,
>
>A new training model has been established for the AFM2.  We have 
>moved away from staff training to lab member training.  This is an 
>approach recommended by the lab member advisor committee.  If you 
>look up the AFM2 on the Wiki, you will find the following approach to training.
>
>There are 4 steps to complete training on the AFM.
>
>1) First, read all documentation on the website pertaining to the tool.
>
>2) Second, you must complete a 1-on-1 training with a user assigned 
>to you by a tool superuser or SNF staff, fill out the form 
>associated with a 1-on-1 training 
>(<https://snf.stanford.edu/SNF/equipment/characterization-testing/afm2/AFM2SNF_AFM_1on1_Training_v01.doc>linked 
>here), and submit 1 imaged surface made during this training. Bring 
>AFM tips of your own to this training (tapping mode recommended; 
>purchasable from the SNF stockroom).
>
>3) Third, you must complete a final sign-off performed by an 
>approved superuser or staff member. In this sign-off, you will be 
>expected to operate the tool without prompting from the person 
>performing the sign-off. You will be asked a few questions that you 
>must answer correctly, as well. If you fail this sign-off, you must 
>finish an additional task decided at the discretion of the trainer. 
>You might be required to (a) ask for help from a co-worker to make a 
>new image to submit, (b) practice with a superuser the part of 
>machine operation you missed, or (c) complete another full 1-on-1 training.
>
>4) After the previous steps, you will be given the ability to enable 
>the machine. Your fourth task is to submit 1 image to demonstrate 
>your ability to run the tool within 1 week of being able to enable 
>the machine. If this is not done, your machine access will be revoked.
>
>Please help support the lab and your lab member advisory committee 
>by volunteering to be an AFM2 superuser.  Thank you Jason for your 
>effort to get this started.
>
>Regards,
>Ed





More information about the afm2 mailing list