From eenriquez at snf.stanford.edu  Thu Oct  7 14:14:15 2004
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Thu, 7 Oct 2004 14:14:15 -0700
Subject: Comment AG4108 SNF 2004-09-30 09:49:51: Installed oxidation tray
Message-ID: <mailman.187.1356280549.3222.ag4108-pcs@snf.stanford.edu>

Installed silicide tray



From eenriquez at snf.stanford.edu  Thu Oct  7 14:14:39 2004
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Thu, 7 Oct 2004 14:14:39 -0700
Subject: Comment AG4108 SNF 2004-10-07 14:14:37: Installed silicide tray
Message-ID: <mailman.188.1356280550.3222.ag4108-pcs@snf.stanford.edu>




From pethe at snf.stanford.edu  Sun Oct 10 16:27:53 2004
From: pethe at snf.stanford.edu (pethe at snf.stanford.edu)
Date: Sun, 10 Oct 2004 16:27:53 -0700
Subject: Problem AG4108 SNF 2004-10-10 16:27:52: Temp Error during Anneal
Message-ID: <mailman.189.1356280550.3222.ag4108-pcs@snf.stanford.edu>

I was doing a 700C anneal in Ar for 1min. The temperature shot up beyond the setpoint and then fell rapidly down given an error that the "Temperature was out of Error Range". I have left the output from the plotter at the machine itself. 



From sjain at snf.stanford.edu  Tue Oct 12 21:10:41 2004
From: sjain at snf.stanford.edu (sjain at snf.stanford.edu)
Date: Tue, 12 Oct 2004 21:10:41 -0700
Subject: Problem AG4108 SNF 2004-10-12 21:10:40: batttery low signal on gas flow meters
Message-ID: <mailman.190.1356280550.3222.ag4108-pcs@snf.stanford.edu>




From eenriquez at snf.stanford.edu  Fri Oct 22 14:20:01 2004
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Fri, 22 Oct 2004 14:20:01 -0700
Subject: Comment AG4108 SNF 2004-10-07 14:14:37: Installed silicide tray
Message-ID: <mailman.191.1356280550.3222.ag4108-pcs@snf.stanford.edu>

Installed oxidation tray



From eenriquez at snf.stanford.edu  Fri Oct 22 14:20:47 2004
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Fri, 22 Oct 2004 14:20:47 -0700
Subject: Comment AG4108 SNF 2004-10-22 14:20:46: Installed oxidation tray
Message-ID: <mailman.192.1356280550.3222.ag4108-pcs@snf.stanford.edu>




From chozone at snf.stanford.edu  Fri Oct 22 19:23:39 2004
From: chozone at snf.stanford.edu (chozone at snf.stanford.edu)
Date: Fri, 22 Oct 2004 19:23:39 -0700
Subject: Problem AG4108 SNF 2004-10-22 19:23:38: The pyrometer chiller is 20.8
Message-ID: <mailman.193.1356280550.3222.ag4108-pcs@snf.stanford.edu>

The pyrometer chiller is 20.8 , which should be 14.9-15.1



From ericp at snf.stanford.edu  Sat Oct 23 15:13:12 2004
From: ericp at snf.stanford.edu (ericp at snf.stanford.edu)
Date: Sat, 23 Oct 2004 15:13:12 -0700
Subject: Comment AG4108 SNF 2004-10-23 15:13:09: pyro chiller ok now
Message-ID: <mailman.194.1356280550.3222.ag4108-pcs@snf.stanford.edu>

The chiller is chilling properly now, but all 
of the ice cream has melted!  Darn!