From rik at snf.stanford.edu Wed Oct 8 12:47:01 2008 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Wed, 8 Oct 2008 12:47:01 -0700 Subject: Problem AG4108 SNF 2008-10-08 12:47:00: over temperature top plate Message-ID: Same error as riteshj reported From emyers at snf.stanford.edu Thu Oct 9 08:52:05 2008 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Thu, 9 Oct 2008 08:52:05 -0700 Subject: Shutdown AG4108 SNF 2008-10-09 08:52:05: Over Temp Failures Message-ID: Checked that the cooling water was running this morning. Won't run with these faults. From eenriquez at snf.stanford.edu Fri Oct 10 10:33:28 2008 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 10 Oct 2008 10:33:28 -0700 Subject: Comment AG4108 SNF 2008-10-10 10:33:27: Update over-temp Message-ID: Installed new recirculator. Need to be tested. From shott at snf.stanford.edu Sat Oct 18 10:10:06 2008 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Sat, 18 Oct 2008 10:10:06 -0700 Subject: Shutdown AG4108 SNF 2008-10-09 08:52:05: Over Temp Failures Message-ID: Resetting temperature switches ... There is a new heat exchanger but, as of yet, we have not yet determined how effective this new cooling strategy is. John From emyers at snf.stanford.edu Fri Oct 24 09:53:57 2008 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Fri, 24 Oct 2008 09:53:57 -0700 Subject: Shutdown AG4108 SNF 2008-10-24 09:53:56: Ciller Failure Message-ID: Can not use until the chiller is repaired From eenriquez at snf.stanford.edu Fri Oct 24 12:42:22 2008 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 24 Oct 2008 12:42:22 -0700 Subject: Comment AG4108 SNF 2008-10-24 12:42:21: Update on Chiller failure Message-ID: Found one of the chamber water cooling lines had popped off. Repaired the water line. Also lowered the line pressure from 60 to 50 psi. Noticed the water was very dirty. Ray S. flushed out the chiller. Turned chiller back on. We will leave the system on shutdown over the weekend and continue to monitor for leaks. Also need to check how the system will perform with the lower water pressure.