From tejask at snf.stanford.edu Sun Dec 5 20:28:27 2004 From: tejask at snf.stanford.edu (tejask at snf.stanford.edu) Date: Sun, 5 Dec 2004 20:28:27 -0800 Subject: Comment amtetcher SNF 2004-12-05 20:28:27: LOW DC BIAS Message-ID: Process stops every 1-1.5 mins due to low DC bias. Reading is low - only 430V and 1345W. From tejask at snf.stanford.edu Sun Dec 5 20:29:18 2004 From: tejask at snf.stanford.edu (tejask at snf.stanford.edu) Date: Sun, 5 Dec 2004 20:29:18 -0800 Subject: Problem amtetcher SNF 2004-12-05 20:29:17: Low DC bias Message-ID: Process stops every 1-1.5 mins due to low DC bias. Reading is low - only 430V AND 1345W. From eenriquez at snf.stanford.edu Mon Dec 6 15:45:50 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Dec 2004 15:45:50 -0800 Subject: Shutdown amtetcher SNF 2004-12-06 15:45:49: Hexode wont rotate Message-ID: From eenriquez at snf.stanford.edu Tue Dec 7 11:30:53 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 7 Dec 2004 11:30:53 -0800 Subject: Comment amtetcher SNF 2004-12-05 20:28:27: LOW DC BIAS Message-ID: DC bias ok after replacing all dummy wafers and etching the hexode. From eenriquez at snf.stanford.edu Tue Dec 7 11:31:33 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 7 Dec 2004 11:31:33 -0800 Subject: Problem amtetcher SNF 2004-12-05 20:29:17: Low DC bias Message-ID: DC bias ok after replacing all dummy wafers and etching the hexode From eenriquez at snf.stanford.edu Wed Dec 15 10:10:34 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 15 Dec 2004 10:10:34 -0800 Subject: Shutdown amtetcher SNF 2004-12-06 15:45:49: Hexode wont rotate Message-ID: Still manually lowering the belljar. Taking the system off shutdown so users can log on to coral. From eenriquez at snf.stanford.edu Wed Dec 15 10:11:34 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 15 Dec 2004 10:11:34 -0800 Subject: Problem amtetcher SNF 2004-12-15 10:11:33: Still down for the hexode not rotating Message-ID: Need maintenance assistance in order to run. From eenriquez at snf.stanford.edu Mon Dec 20 16:25:38 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 20 Dec 2004 16:25:38 -0800 Subject: Problem amtetcher SNF 2004-12-15 10:11:33: Still down for the hexode not rotating Message-ID: Replaced a burnt pico fuse on the interconnect board. Also repaired the encoder.