From eenriquez at snf.stanford.edu Mon Jan 3 15:50:12 2005 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 3 Jan 2005 15:50:12 -0800 Subject: Comment amtetcher SNF 2005-01-03 15:50:11: Work done during shutdown Message-ID: Repaired hexode rotation problem (blown pico fuse). Replaced all ardel parts. Wet cleaned the chamber. From mislam at snf.stanford.edu Wed Jan 12 09:32:05 2005 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Wed, 12 Jan 2005 09:32:05 -0800 Subject: Shutdown amtetcher SNF 2005-01-12 09:32:04: Arc mark tray#5 Message-ID: From eenriquez at snf.stanford.edu Thu Jan 13 11:59:17 2005 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 13 Jan 2005 11:59:17 -0800 Subject: Shutdown amtetcher SNF 2005-01-12 09:32:04: Arc mark tray#5 Message-ID: Cleaned up arc marks. Found recipe 3's pressure setting had been changed to 50 mT instead of 40 mT. Changed pressure setting back and ran test. From jacobw at snf.stanford.edu Fri Jan 21 16:14:54 2005 From: jacobw at snf.stanford.edu (jacobw at snf.stanford.edu) Date: Fri, 21 Jan 2005 16:14:54 -0800 Subject: Problem amtetcher SNF 2005-01-21 16:14:53: hex not rotating smoothly Message-ID: The hex rotation gets stuck often and seems to have problems From eenriquez at snf.stanford.edu Mon Jan 24 09:47:17 2005 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 24 Jan 2005 09:47:17 -0800 Subject: Problem amtetcher SNF 2005-01-21 16:14:53: hex not rotating smoothly Message-ID: Cleaned rotary seal. From griffin at snf.stanford.edu Thu Jan 27 12:55:34 2005 From: griffin at snf.stanford.edu (griffin at snf.stanford.edu) Date: Thu, 27 Jan 2005 12:55:34 -0800 Subject: Comment amtetcher SNF 2005-01-27 12:55:33: sticky hex rotation Message-ID: Hex rotation was sticky. Pump down to base press on process-3 failed first attempt