From mahnaz at stanford.edu Wed Sep 8 11:55:03 2010 From: mahnaz at stanford.edu (Mahnaz Mansourpour) Date: Wed, 08 Sep 2010 11:55:03 -0700 Subject: Demo time Message-ID: <4C87DC07.1010806@stanford.edu> Hello all, I like to let you know that our favorite group ASML has to do a demo in 8" for a customer. The system will go down at *6 am Tuesday 21st *and SNF members will not have access to the tool till some times *Thursday afternoon 23rd around 4 pm.* The demo should finish earlier that day but the system needs to be put back to 4" and all the testing needs to be completed. One other caveat, There is a possibility of not having the 3D capability at the time the tool gets released to SNF on 9/23 till the following week. ASML has been planning for this for some time and they will work in two shifts in order to minimize the impact to SNF members. I will have a meeting with asml folks tomorrow and I will update you of future changes. Cheers mahnaz -------------- next part -------------- An HTML attachment was scrubbed... URL: From mahnaz at stanford.edu Thu Sep 23 15:36:59 2010 From: mahnaz at stanford.edu (Mahnaz Mansourpour) Date: Thu, 23 Sep 2010 15:36:59 -0700 Subject: ASML demo Message-ID: <4C9BD68B.9020507@stanford.edu> Hello all, As most of you have observed, ASML folks are hard at work but we have encountered some issues and the demo has picked up some delays.... So the system will be down to asml till Friday 4 pm at least. We will do our best to have the system ready for 4" FRONT side only by tomorrow 4 pm. Thank you for your cooperation in this matter... mahnaz From mahnaz at stanford.edu Fri Sep 24 15:52:55 2010 From: mahnaz at stanford.edu (Mahnaz Mansourpour) Date: Fri, 24 Sep 2010 15:52:55 -0700 Subject: ASML is up Message-ID: <4C9D2BC7.9080209@stanford.edu> hello all, Just to let you know that the system is up and running including the3-D align. cheers Mahnaz