From gsosa at snf.stanford.edu Wed Jun 4 16:15:32 2008 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 4 Jun 2008 16:15:32 -0700 Subject: Comment bluem SNF 2008-06-04 16:15:32: Update-6/4/08 Message-ID: The cooling blower has been ordered and shipped from the equipment manufactureer. We are expecting delivery in the next day or so. Sorry for the long delay. From gsosa at snf.stanford.edu Tue Jun 10 16:36:26 2008 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Tue, 10 Jun 2008 16:36:26 -0700 Subject: Shutdown bluem SNF 2008-05-15 12:35:21: no power Message-ID: Troubleshot and determined that the cooling blower motor was shorted out. Replaced the blower and tested operation. All OK. Oven is ready to use. GS/MV From lwchang at snf.stanford.edu Fri Jun 20 16:34:08 2008 From: lwchang at snf.stanford.edu (lwchang at snf.stanford.edu) Date: Fri, 20 Jun 2008 16:34:08 -0700 Subject: Problem bluem SNF 2008-06-20 16:34:07: Wrong Temp reading Message-ID: The pro-master reads 550C when the chamber is in room temp... From vilanova at snf.stanford.edu Tue Jun 24 06:51:16 2008 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 24 Jun 2008 06:51:16 -0700 Subject: Problem bluem SNF 2008-06-20 16:34:07: Wrong Temp reading Message-ID: The temp from the thermocouple matches the temp shown on the front panel. Oven Working Fine,ready to use. . From lwchang at snf.stanford.edu Sun Jun 29 12:54:24 2008 From: lwchang at snf.stanford.edu (lwchang at snf.stanford.edu) Date: Sun, 29 Jun 2008 12:54:24 -0700 Subject: Problem bluem SNF 2008-06-29 12:54:23: front panel temp. reading 600C Message-ID: