From ahazeghi at stanford.edu Fri Nov 17 14:36:46 2006 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Fri, 17 Nov 2006 14:36:46 -0800 Subject: Cryostat update Message-ID: Greetings, The system is back up however one of the probes is disabled because I could not find the small bags with lead balls and screw sets which are needed to replace probe tips. I noticed some items in the drawer for Low T station removed, including the bag with lead balls and tiny screws. If you have removed these items please bring them back. We will have to wait for the vendor to ship us a new set of screws until then there are only 3 probes, unless that bag is found. Thanks, Arash -- Arash Hazeghi PhD Candidate Stanford System for Integrated Systems CIS-X 300, 420 Via Palou Mall, Stanford, CA 94305 tel:650-725-0418 cell:650-353-1866 https://www.stanford.edu/group/nanoelectronics/index.htm From aokyay at stanford.edu Fri Nov 17 14:47:19 2006 From: aokyay at stanford.edu (Ali Kemal Okyay) Date: Fri, 17 Nov 2006 14:47:19 -0800 Subject: res removed saturday Message-ID: <000601c70a9a$59567c70$c76418ac@kapadokya> ____________________________________________________________________________ ________________ Ali K. Okyay | Department of Electrical Engineering | Stanford University | Doctoral Student aokyay at stanford.edu | Center for Integrated Systems #13, Stanford CA, 94305 -------------- next part -------------- An HTML attachment was scrubbed... URL: From aokyay at stanford.edu Sat Nov 18 16:50:53 2006 From: aokyay at stanford.edu (Ali Kemal Okyay) Date: Sat, 18 Nov 2006 16:50:53 -0800 Subject: res removed Sunday Message-ID: <000001c70b74$c7c7a410$c76418ac@kapadokya> ____________________________________________________________________________ ________________ Ali K. Okyay | Department of Electrical Engineering | Stanford University | Doctoral Student aokyay at stanford.edu | Center for Integrated Systems #13, Stanford CA, 94305 -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahazeghi at stanford.edu Mon Nov 27 20:14:08 2006 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Mon, 27 Nov 2006 20:14:08 -0800 Subject: Probe tips Message-ID: Greetings, I have received the replacement screws but not the lead balls needed for probe tips, without lead balls the ceramic plate for tip assembly will break due to thermal stress. Also one of the tiny screws has been taken off by mistake. Until further notice please do not use the system. I am shutting down the equipment under Coral. Just a reminder, users are not allowed to change/alter/replace tips on the system. The reason is hopefully apparent by now! Thanks, Arash -- Arash Hazeghi PhD Candidate Stanford System for Integrated Systems CIS-X 300, 420 Via Palou Mall, Stanford, CA 94305 tel:650-725-0418 cell:650-353-1866 https://www.stanford.edu/group/nanoelectronics/index.htm From ahazeghi at stanford.edu Thu Nov 30 20:33:17 2006 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Thu, 30 Nov 2006 20:33:17 -0800 Subject: Cryostat back up Message-ID: Folks, Cryostat is back up, I changed the two probe tips which were bent. I wanted to remind you again that users are not allowed to replace/alter/tighten or loosen probe tips. If you have special needs please order your own tips from Lakeshore Cryogenics inc. and I will install it for you. We have been paying for tips so far but from now on ,users who bend tips will be charged $100 per tip. Also the triax sample holder is now fixed, but the new policy is that the grounded holder will be installed on the system as default. Users who need triax holder need to get it from me and bring it back when they are done. Thanks, Arash -- Arash Hazeghi PhD Candidate Stanford System for Integrated Systems CIS-X 300, 420 Via Palou Mall, Stanford, CA 94305 tel:650-725-0418 cell:650-353-1866 https://www.stanford.edu/group/nanoelectronics/index.htm