diffusion Morning Report 05/08/12

Ted Berg tberg at stanford.edu
Tue May 8 06:20:47 PDT 2012


Good Morning All,
     Looking OK this morning. No new issues overnight.
     Leftovers: POCL3 and BBR3 sensor issues, BBr3 tube and torch 
replacement , Tylan 1 tube and torch replacement, Epi silane, Burnbox 
interlocks installed and tested-checking out recipes, Tylan 2 poor 
uniformity, Thermco 3 and 4 no TLC
     Resolved: epi contactor issue, TEL loader, Thermco Poly2 leak

					
	Date: 	5/8/12 	THICKNESS-Change at 		Priority
Tube Name/Number 	Status 				
Tylan 1 	*down* 	*Replacing tube and torch* 	** 	** 	*1*
Tylan 2 	*yellow* 	*bad uniformity* 	** 	** 	**
Tylan 3 	*up* 	** 	** 	** 	**
Tylan 4 	*up* 	** 	** 	** 	**
Tylan 5-BBr3 	*yellow* 	*Replacing tube and torch* 	** 	** 	*2*
Tylan 6-POCl3 	*yellow* 	*tgo sensor issue tube reinstalled-ran POCl3 
run* 	** 	** 	**
Tylan 7-TEOS2 	*down* 	*burn box* 	*14.39/30* 	** 	**
Tylan 8-SiGe 	*down* 	*burn box* 	*3.4/30* 	** 	**
Tylan 9-Poly 	*down* 	*burn box* 	*23.7/30* 	** 	**
Tylan 10-Nitride 	*down* 	*burn box* 	*17.1/30* 	** 	**
Tylan 11-LTO 	*down* 	*burn box* 	*9.7./30* 	** 	**
Tylan 12-FGA 	*up* 	** 	** 	** 	**
Thermco 1 	*up* 	** 	** 	** 	**
Thermco 2 	*up* 	** 	** 	** 	**
Thermco 3 	*yellow* 	*testing TLC* 	** 	** 	**
Thermco4 	*yellow* 	*bad source controller-no TLC* 	** 	** 	**
Thermco Poly1 	*up* 	** 	** 	*
* 	**
Thermco Poly2 	*up* 	** 	** 	** 	**
Thermco Nitride1 	*up* 	** 	** 	** 	**
Thermco bpsg 	*up* 	** 	** 	** 	**
AMAT Epi Cham. A 	*yellow* 	*SiH4 issues* 	** 	** 	**
AMAT Epi Cham. B 	*down* 	** 	** 	** 	**
TEL Spa 	*yellow* 	*needs test* 	** 	** 	**
Burn Box 	*yellow* 	*testing cvd recipes* 	** 	** 	*3*
SEM 4160 	*up* 	** 	** 	** 	**
FGA2 	*up* 	** 	** 	** 	**
SiH4 for furnaces 	*on* 	*crossover ok* 	*changeover working well* 	** 	**


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/diffusion/attachments/20120508/02dd0afb/attachment.html>


More information about the diffusion mailing list