From emes at snf.stanford.edu  Wed Nov  1 08:27:27 2000
From: emes at snf.stanford.edu (emes at snf.stanford.edu)
Date: Nov 1, 2000 8:27:27 AM
Subject: Shutdown drytek2: drytek 2  cooling water flow = 0.
Message-ID: <mailman.53.1357938282.25682.drytek2-pcs@snf.stanford.edu>

drytek 2  electrode cooling water flow meter 
indicates 0 flow.



From booth at snf.stanford.edu  Wed Nov  1 08:56:34 2000
From: booth at snf.stanford.edu (booth at snf.stanford.edu)
Date: Nov 1, 2000 8:56:34 AM
Subject: Shutdown Clear drytek2: restarted chiller.
Message-ID: <mailman.54.1357938282.25682.drytek2-pcs@snf.stanford.edu>




From pzwahlen at snf.stanford.edu  Wed Nov  1 12:47:22 2000
From: pzwahlen at snf.stanford.edu (pzwahlen at snf.stanford.edu)
Date: Nov 1, 2000 12:47:22 PM
Subject: Shutdown drytek2: Cooling electrode too low
Message-ID: <mailman.55.1357938282.25682.drytek2-pcs@snf.stanford.edu>




From booth at snf.stanford.edu  Wed Nov  1 03:17:58 2000
From: booth at snf.stanford.edu (booth at snf.stanford.edu)
Date: Nov 1, 2000 3:17:58 PM
Subject: Shutdown Clear drytek2: restarted water flow
Message-ID: <mailman.56.1357938282.25682.drytek2-pcs@snf.stanford.edu>




From booth at snf.stanford.edu  Mon Nov 20 07:56:03 2000
From: booth at snf.stanford.edu (booth at snf.stanford.edu)
Date: Nov 20, 2000 7:56:03 AM
Subject: Problem drytek2: O2 MFC error
Message-ID: <mailman.58.1357938282.25682.drytek2-pcs@snf.stanford.edu>

There is no leak or flow problem.  The old O2 MFC controller
just has a faulty deviation LED circuit.
Disregard the deviation LED.



From amol at snf.stanford.edu  Wed Nov 22 11:47:03 2000
From: amol at snf.stanford.edu (amol at snf.stanford.edu)
Date: Nov 22, 2000 11:47:03 AM
Subject: Problem drytek2: pink powder near lowest electrode
Message-ID: <mailman.59.1357938282.25682.drytek2-pcs@snf.stanford.edu>

Pink coloured powder near the lowest electrode and also at the bottom of  window.



From cbaxter at snf.stanford.edu  Wed Nov 22 06:08:22 2000
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Nov 22, 2000 6:08:22 PM
Subject: Problem drytek2: pink powder near lowest electrode
Message-ID: <mailman.60.1357938282.25682.drytek2-pcs@snf.stanford.edu>

removed window rubber seal and used vacuum grease
to keep it moist.



From booth at snf.stanford.edu  Mon Nov 27 07:12:13 2000
From: booth at snf.stanford.edu (booth at snf.stanford.edu)
Date: Nov 27, 2000 7:12:13 AM
Subject: Shutdown drytek2: Vane pump needs oil.
Message-ID: <mailman.61.1357938282.25682.drytek2-pcs@snf.stanford.edu>




From booth at snf.stanford.edu  Mon Nov 27 08:08:40 2000
From: booth at snf.stanford.edu (booth at snf.stanford.edu)
Date: Nov 27, 2000 8:08:40 AM
Subject: Shutdown drytek2: Vane pump needs oil.
Message-ID: <mailman.62.1357938282.25682.drytek2-pcs@snf.stanford.edu>

cleaned de-mister oil return line
added oil to vane pump