From beckwith at snf.stanford.edu Fri Apr 2 14:22:53 2004 From: beckwith at snf.stanford.edu (beckwith at snf.stanford.edu) Date: Fri, 2 Apr 2004 14:22:53 -0800 Subject: Comment drytek2 2004-04-02 14:22:52: cooling water seems to have air in the line Message-ID: I only did short etches <2 min. electrode plates did not get hot. From naiqian at snf.stanford.edu Sun Apr 4 05:39:12 2004 From: naiqian at snf.stanford.edu (naiqian at snf.stanford.edu) Date: Sun, 4 Apr 2004 05:39:12 -0700 Subject: Problem drytek2 2004-04-04 05:39:11: standby pressure is 100mt not 200mt Message-ID: From cbaxter at snf.stanford.edu Mon Apr 5 16:17:19 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 5 Apr 2004 16:17:19 -0700 Subject: Problem drytek2 2004-04-04 05:39:11: standby pressure is 100mt not 200mt Message-ID: adjusted stand by pressure regulator to 250mt. From cbaxter at snf.stanford.edu Mon Apr 5 16:17:25 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 5 Apr 2004 16:17:25 -0700 Subject: Comment drytek2 2004-04-02 14:22:52: cooling water seems to have air in the line Message-ID: From cbaxter at snf.stanford.edu Mon Apr 5 16:58:26 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 5 Apr 2004 16:58:26 -0700 Subject: Shutdown drytek2 2004-04-05 16:58:26: routin maint Message-ID: From cbaxter at snf.stanford.edu Mon Apr 5 18:01:15 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 5 Apr 2004 18:01:15 -0700 Subject: Shutdown drytek2 2004-04-05 16:58:26: routin maint Message-ID: completed oil and filters changed From tomada at snf.stanford.edu Fri Apr 9 15:11:02 2004 From: tomada at snf.stanford.edu (tomada at snf.stanford.edu) Date: Fri, 9 Apr 2004 15:11:02 -0700 Subject: Problem drytek2 2004-04-09 15:11:01: Light burned Message-ID: The light of the "Machine" bottom is off. Probably needs to be replaced. From eenriquez at snf.stanford.edu Mon Apr 12 09:48:39 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 12 Apr 2004 09:48:39 -0700 Subject: Problem drytek2 2004-04-09 15:11:01: Light burned Message-ID: Replaced burnt out light. From sanli at snf.stanford.edu Tue Apr 13 09:38:21 2004 From: sanli at snf.stanford.edu (sanli at snf.stanford.edu) Date: Tue, 13 Apr 2004 09:38:21 -0700 Subject: Shutdown drytek2 2004-04-13 09:38:17: cooling water flow is very low and unsteady Message-ID: From goksen at snf.stanford.edu Wed Apr 21 14:22:20 2004 From: goksen at snf.stanford.edu (goksen at snf.stanford.edu) Date: Wed, 21 Apr 2004 14:22:20 -0700 Subject: Problem drytek2 2004-04-21 14:22:19: loose white plastic pieces Message-ID: There are white plastic pieces attached to the plates by hex screws. Some of them are loose. From cbaxter at snf.stanford.edu Wed Apr 21 19:27:07 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 21 Apr 2004 19:27:07 -0700 Subject: Problem drytek2 2004-04-21 14:22:19: loose white plastic pieces Message-ID: tighten all 7 teflon guide From naiqian at snf.stanford.edu Mon Apr 26 05:57:40 2004 From: naiqian at snf.stanford.edu (naiqian at snf.stanford.edu) Date: Mon, 26 Apr 2004 05:57:40 -0700 Subject: Problem drytek2 2004-04-26 05:57:39: leak somewhere Message-ID: The pressure can not meet target value. From sahin at snf.stanford.edu Mon Apr 26 09:16:46 2004 From: sahin at snf.stanford.edu (sahin at snf.stanford.edu) Date: Mon, 26 Apr 2004 09:16:46 -0700 Subject: Comment drytek2 2004-04-26 09:16:46: pump and blower buttons are off Message-ID: From eenriquez at snf.stanford.edu Mon Apr 26 11:13:18 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 26 Apr 2004 11:13:18 -0700 Subject: Comment drytek2 2004-04-26 09:16:46: pump and blower buttons are off Message-ID: Turned on pump and blower From eenriquez at snf.stanford.edu Mon Apr 26 11:13:57 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 26 Apr 2004 11:13:57 -0700 Subject: Problem drytek2 2004-04-26 05:57:39: leak somewhere Message-ID: Turned on pump and blower. Ran O2 clean with problems