From crichter at snf.stanford.edu Mon May 3 17:09:55 2004 From: crichter at snf.stanford.edu (crichter at snf.stanford.edu) Date: Mon, 3 May 2004 17:09:55 -0700 Subject: Problem drytek2 2004-05-03 17:09:55: timer does not work properly Message-ID: timer goes off when timer is set at 6 minutes. Also the power console displays and E05 From crichter at snf.stanford.edu Mon May 3 17:17:44 2004 From: crichter at snf.stanford.edu (crichter at snf.stanford.edu) Date: Mon, 3 May 2004 17:17:44 -0700 Subject: Problem drytek2 2004-05-03 17:17:42: timer seems to only go up to 3 min Message-ID: From ychliu at snf.stanford.edu Tue May 4 11:06:22 2004 From: ychliu at snf.stanford.edu (ychliu at snf.stanford.edu) Date: Tue, 4 May 2004 11:06:22 -0700 Subject: Comment drytek2 2004-05-04 11:06:21: timer 1 & 3 OK Message-ID: From eenriquez at snf.stanford.edu Tue May 4 11:52:13 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 4 May 2004 11:52:13 -0700 Subject: Comment drytek2 2004-05-04 11:06:21: timer 1 & 3 OK Message-ID: Thanks From eenriquez at snf.stanford.edu Tue May 4 11:53:45 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 4 May 2004 11:53:45 -0700 Subject: Problem drytek2 2004-05-03 17:17:42: timer seems to only go up to 3 min Message-ID: All 3 process timers checked out OK From eenriquez at snf.stanford.edu Tue May 4 11:54:07 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 4 May 2004 11:54:07 -0700 Subject: Problem drytek2 2004-05-03 17:09:55: timer does not work properly Message-ID: All 3 process timers checked out OK From beckwith at snf.stanford.edu Thu May 6 15:36:18 2004 From: beckwith at snf.stanford.edu (beckwith at snf.stanford.edu) Date: Thu, 6 May 2004 15:36:18 -0700 Subject: Problem drytek2 2004-05-06 15:36:18: proc 1 02 descum; could not get the reflected Message-ID: power <100. Also, something seems to be wrong with the #1 RF pwr pot. From cbaxter at snf.stanford.edu Thu May 6 16:33:50 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Thu, 6 May 2004 16:33:50 -0700 Subject: Problem drytek2 2004-05-06 15:36:18: proc 1 02 descum; could not get the reflected Message-ID: manually tune rf match From crichter at snf.stanford.edu Fri May 7 18:30:29 2004 From: crichter at snf.stanford.edu (crichter at snf.stanford.edu) Date: Fri, 7 May 2004 18:30:29 -0700 Subject: Problem drytek2 2004-05-07 18:30:28: Cycle start button stuck Message-ID: button does not pop back out again From eenriquez at snf.stanford.edu Mon May 10 11:23:58 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 10 May 2004 11:23:58 -0700 Subject: Problem drytek2 2004-05-07 18:30:28: Cycle start button stuck Message-ID: The back of the switch was pushed out. Repaired switch and tested many,many times with no problems. From lindaw at snf.stanford.edu Mon May 10 15:03:36 2004 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Mon, 10 May 2004 15:03:36 -0700 Subject: Problem drytek2 2004-05-10 15:03:35: cycle start button sticking when pushed Message-ID: button goes and and does not pop back out unless pryed with edge of card key From eenriquez at snf.stanford.edu Tue May 11 11:58:47 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 11 May 2004 11:58:47 -0700 Subject: Problem drytek2 2004-05-10 15:03:35: cycle start button sticking when pushed Message-ID: Replaced the cycle start button. From aokyay at snf.stanford.edu Wed May 12 13:06:59 2004 From: aokyay at snf.stanford.edu (aokyay at snf.stanford.edu) Date: Wed, 12 May 2004 13:06:59 -0700 Subject: Problem drytek2 2004-05-12 13:06:59: does not display RF fwd power Message-ID: From lindaw at snf.stanford.edu Wed May 12 15:54:51 2004 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Wed, 12 May 2004 15:54:51 -0700 Subject: Comment drytek2 2004-05-12 15:54:50: forward power on digital meter reading 0000 Message-ID: while forward power setting on power supply reads ~200W for O2 descum (should be 500W, but last user may have been tweaking the power level when he/she reported the meter not reading forward power). Reflected power on digital readout upper panel is 20W, as well as 20 on the analog meter on the power supply. Plasma looks ok. From eenriquez at snf.stanford.edu Thu May 13 09:53:56 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 13 May 2004 09:53:56 -0700 Subject: Comment drytek2 2004-05-12 15:54:50: forward power on digital meter reading 0000 Message-ID: Ran 3x without any problems. From eenriquez at snf.stanford.edu Thu May 13 09:54:15 2004 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 13 May 2004 09:54:15 -0700 Subject: Problem drytek2 2004-05-12 13:06:59: does not display RF fwd power Message-ID: Ran 3x without any problems.