From eenriquez at snf.stanford.edu  Mon May 14 12:27:40 2007
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Mon, 14 May 2007 12:27:40 -0700
Subject: Shutdown drytek2 SNF 2007-05-14 12:27:37: No cooling water
Message-ID: <mailman.802.1357938289.25682.drytek2-pcs@snf.stanford.edu>

Water shut-off due to TEL install.



From cbaxter at snf.stanford.edu  Mon May 14 14:02:47 2007
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Mon, 14 May 2007 14:02:47 -0700
Subject: Shutdown drytek2 SNF 2007-05-14 12:27:37: No cooling water
Message-ID: <mailman.803.1357938289.25682.drytek2-pcs@snf.stanford.edu>

cooling water is back on.



From axiu at snf.stanford.edu  Mon May 21 09:44:37 2007
From: axiu at snf.stanford.edu (axiu at snf.stanford.edu)
Date: Mon, 21 May 2007 09:44:37 -0700
Subject: Problem drytek2 SNF 2007-05-21 09:44:36: flow can't reach set point 150
Message-ID: <mailman.804.1357938289.25682.drytek2-pcs@snf.stanford.edu>




From eenriquez at snf.stanford.edu  Mon May 21 11:45:52 2007
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Mon, 21 May 2007 11:45:52 -0700
Subject: Problem drytek2 SNF 2007-05-21 09:44:36: flow can't reach set point 150
Message-ID: <mailman.805.1357938289.25682.drytek2-pcs@snf.stanford.edu>

Adjusted the gas flow (recommended = 100 sccm ; actual = 10 sccm.  Also, the pressure setpoint = 220 mT; recommended pressure = 150 mT.