From latta at snf.stanford.edu Wed Nov 14 11:33:23 2007 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Wed, 14 Nov 2007 11:33:23 -0800 Subject: Problem drytek2 SNF 2007-11-14 11:33:22: electrodes very warm to the touch Message-ID: May be a problem with cooling water. Bottom electrode a bit 'cooler' than the top one..... From cbaxter at snf.stanford.edu Wed Nov 14 13:15:04 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 14 Nov 2007 13:15:04 -0800 Subject: Problem drytek2 SNF 2007-11-14 11:33:22: electrodes very warm to the touch Message-ID: Chiller had an error for low water level and stopped recirculating, top off with di water and now chiller is cooling to 18C set point. From dgunning at snf.stanford.edu Tue Nov 20 20:10:49 2007 From: dgunning at snf.stanford.edu (dgunning at snf.stanford.edu) Date: Tue, 20 Nov 2007 20:10:49 -0800 Subject: Shutdown drytek2 SNF 2007-11-20 20:10:49: smoke Message-ID: o2 descum recipe ended prematurely. when chamber door opened there was smoke coming out of chamber :o/ not a good sign! From eenriquez at snf.stanford.edu Wed Nov 21 08:42:21 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 21 Nov 2007 08:42:21 -0800 Subject: Shutdown drytek2 SNF 2007-11-20 20:10:49: smoke Message-ID: Reset vacuum pump circuit breaker. Ran 5 minute O2 clean with no problems