From gth at snf.stanford.edu Tue Oct 2 21:11:58 2007 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Tue, 2 Oct 2007 21:11:58 -0700 Subject: Problem drytek2 SNF 2007-10-02 21:11:57: RF Level Pot bad. Message-ID: Ran Resist Strip Recepie The reading fluctuates like hell. (between 0 and 500 W), when I turn the RF Level 1 for Process 1. Please change the Pot. thanks -gaurav From eenriquez at snf.stanford.edu Wed Oct 3 09:50:15 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 09:50:15 -0700 Subject: Problem drytek2 SNF 2007-10-02 21:11:57: RF Level Pot bad. Message-ID: No problem found. RF power controlled smoothly from 100W to 500 W. Found the RF generator was left ON. User might need to be retrained From eenriquez at snf.stanford.edu Wed Oct 3 13:05:21 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 13:05:21 -0700 Subject: Comment drytek2 SNF 2007-10-03 13:05:20: Testing the blog Message-ID: Testing the blog site From eenriquez at snf.stanford.edu Wed Oct 3 13:08:07 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 13:08:07 -0700 Subject: Comment drytek2 SNF 2007-10-03 13:05:20: Testing the blog Message-ID: Message was succesfully sent to the blog site From eenriquez at snf.stanford.edu Wed Oct 3 13:27:51 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 13:27:51 -0700 Subject: Shutdown drytek2 SNF 2007-10-03 13:27:50: Testing the blog site Message-ID: Testing the blog site From eenriquez at snf.stanford.edu Wed Oct 3 13:28:12 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 13:28:12 -0700 Subject: Shutdown drytek2 SNF 2007-10-03 13:27:50: Testing the blog site Message-ID: Completed the blog test From eenriquez at snf.stanford.edu Wed Oct 3 16:14:32 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 16:14:32 -0700 Subject: Problem drytek2 SNF 2007-10-03 16:14:32: Blog testing Message-ID: From eenriquez at snf.stanford.edu Wed Oct 3 18:20:46 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 3 Oct 2007 18:20:46 -0700 Subject: Problem drytek2 SNF 2007-10-03 16:14:32: Blog testing Message-ID: Completed the test. From jrjain at snf.stanford.edu Thu Oct 11 19:50:51 2007 From: jrjain at snf.stanford.edu (jrjain at snf.stanford.edu) Date: Thu, 11 Oct 2007 19:50:51 -0700 Subject: Problem drytek2 SNF 2007-10-11 19:50:49: Standby Pressure Message-ID: After starting standby process, pressure has difficult time reaching 200. Goes up to 260 sporadically and the drops back down to ~15. Left system in Cycle Hold state when Standby pressure went back to ~260. From cbaxter at snf.stanford.edu Tue Oct 16 11:56:23 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Tue, 16 Oct 2007 11:56:23 -0700 Subject: Comment drytek2 SNF 2007-10-16 11:56:23: stand by Message-ID: The cycled start switch is intermittenly sticking, it will need to change, will schedule a down time as soon as we have a replacement momentary switch. From king at snf.stanford.edu Thu Oct 18 00:18:13 2007 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Thu, 18 Oct 2007 00:18:13 -0700 Subject: Problem drytek2 SNF 2007-10-18 00:18:13: Microscope near Drytek2 Message-ID: It's dead or needs a new lamp. (if there's a better place to write up microscopes and other misc equipment let us know, thanks). From elvislin at snf.stanford.edu Sat Oct 20 15:22:40 2007 From: elvislin at snf.stanford.edu (elvislin at snf.stanford.edu) Date: Sat, 20 Oct 2007 15:22:40 -0700 Subject: Problem drytek2 SNF 2007-10-20 15:22:39: No electrical power connection Message-ID: Seems the electric power was shut down or unplug by somehow reason From mislam at snf.stanford.edu Sat Oct 20 21:24:23 2007 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Sat, 20 Oct 2007 21:24:23 -0700 Subject: Comment drytek2 SNF 2007-10-20 21:24:22: power is back, runs ok now Message-ID: There is still a problem with "cycle start" switch From eenriquez at snf.stanford.edu Tue Oct 23 08:05:04 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 23 Oct 2007 08:05:04 -0700 Subject: Problem drytek2 SNF 2007-10-18 00:18:13: Microscope near Drytek2 Message-ID: From eenriquez at snf.stanford.edu Tue Oct 23 08:05:33 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 23 Oct 2007 08:05:33 -0700 Subject: Problem drytek2 SNF 2007-10-20 15:22:39: No electrical power connection Message-ID: Power was reset by user. From eenriquez at snf.stanford.edu Tue Oct 23 08:06:02 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 23 Oct 2007 08:06:02 -0700 Subject: Comment drytek2 SNF 2007-10-20 21:24:22: power is back, runs ok now Message-ID: Power was reset by the user. From cbaxter at snf.stanford.edu Fri Oct 26 09:54:41 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:54:41 -0700 Subject: Problem drytek2 SNF 2007-10-11 19:50:49: Standby Pressure Message-ID: Changed cycled start switch..