From kupnik at snf.stanford.edu Tue Sep 11 22:04:28 2007 From: kupnik at snf.stanford.edu (kupnik at snf.stanford.edu) Date: Tue, 11 Sep 2007 22:04:28 -0700 Subject: Problem drytek2 SNF 2007-09-11 22:04:27: reflected power to high Message-ID: Tried to do a discum, but I could not get the reflected power below 200W. From cbaxter at snf.stanford.edu Wed Sep 12 08:15:37 2007 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 12 Sep 2007 08:15:37 -0700 Subject: Problem drytek2 SNF 2007-09-11 22:04:27: reflected power to high Message-ID: Tuned rf match w/out problem to zero watts reflective. From nvgirish at snf.stanford.edu Mon Sep 17 20:09:34 2007 From: nvgirish at snf.stanford.edu (nvgirish at snf.stanford.edu) Date: Mon, 17 Sep 2007 20:09:34 -0700 Subject: Problem drytek2 SNF 2007-09-17 20:09:34: System does not pump down. Message-ID: Pump roughs for a while but fails to reach setpoint pressure. From fungus at snf.stanford.edu Mon Sep 17 21:45:14 2007 From: fungus at snf.stanford.edu (fungus at snf.stanford.edu) Date: Mon, 17 Sep 2007 21:45:14 -0700 Subject: Problem drytek2 SNF 2007-09-17 21:45:13: Blower button not lit Message-ID: Either the blower button light burnt out or there is something wrong with the blower. From mislam at snf.stanford.edu Tue Sep 18 00:11:47 2007 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Tue, 18 Sep 2007 00:11:47 -0700 Subject: Problem drytek2 SNF 2007-09-18 00:11:46: won't don' t pump to base Message-ID: From eenriquez at snf.stanford.edu Tue Sep 18 08:57:47 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 Sep 2007 08:57:47 -0700 Subject: Problem drytek2 SNF 2007-09-18 00:11:46: won't don' t pump to base Message-ID: Contaminated pump oil. Drained the pump and refilled with clean oil. Ran system with problems. From eenriquez at snf.stanford.edu Tue Sep 18 08:57:55 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 Sep 2007 08:57:55 -0700 Subject: Problem drytek2 SNF 2007-09-17 21:45:13: Blower button not lit Message-ID: Contaminated pump oil. Drained the pump and refilled with clean oil. Ran system with problems. From eenriquez at snf.stanford.edu Tue Sep 18 08:58:07 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 Sep 2007 08:58:07 -0700 Subject: Problem drytek2 SNF 2007-09-17 20:09:34: System does not pump down. Message-ID: Contaminated pump oil. Drained the pump and refilled with clean oil. Ran system with problems. From eenriquez at snf.stanford.edu Tue Sep 18 08:58:50 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 Sep 2007 08:58:50 -0700 Subject: Comment drytek2 SNF 2007-08-29 12:14:15: CF4 ok now Message-ID: Used fixed problem. From eenriquez at snf.stanford.edu Tue Sep 18 08:59:05 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 Sep 2007 08:59:05 -0700 Subject: Comment drytek2 SNF 2007-08-23 13:57:55: No CF4 flow Message-ID: User fixed problem. From nvgirish at snf.stanford.edu Tue Sep 18 11:23:31 2007 From: nvgirish at snf.stanford.edu (nvgirish at snf.stanford.edu) Date: Tue, 18 Sep 2007 11:23:31 -0700 Subject: Problem drytek2 SNF 2007-09-18 11:23:30: Cannot increase chamber pressure Message-ID: Using recipe 2. Chamber pressure needs to be 150. Cannot go more than 100. From eenriquez at snf.stanford.edu Wed Sep 19 10:43:48 2007 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 19 Sep 2007 10:43:48 -0700 Subject: Problem drytek2 SNF 2007-09-18 11:23:30: Cannot increase chamber pressure Message-ID: No problem. Showed users how to adjust the pressure.