From mdickey at snf.stanford.edu Thu Jul 1 07:31:37 2010 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Thu, 1 Jul 2010 07:31:37 -0700 Subject: Comment drytek2 SNF 2010-07-01 07:31:37: pin Message-ID: The pin in the 4th platten is broken off in the whole. The only way to fix this is to drill it out and take out the electrode which would require a couple of days. For now, this can not be fixed. From cbaxter at snf.stanford.edu Mon Jul 5 06:34:29 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 5 Jul 2010 06:34:29 -0700 Subject: Problem drytek2 SNF 2010-06-28 17:19:55: 4th platen from top missing front pin Message-ID: Removed the broken teflon pin and changed all the teflon pins on all the electrode. From cbaxter at snf.stanford.edu Mon Jul 5 06:34:37 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 5 Jul 2010 06:34:37 -0700 Subject: Comment drytek2 SNF 2010-07-01 07:31:37: pin Message-ID: From cmcg at snf.stanford.edu Thu Jul 15 16:26:04 2010 From: cmcg at snf.stanford.edu (cmcg at snf.stanford.edu) Date: Thu, 15 Jul 2010 16:26:04 -0700 Subject: Problem drytek2 SNF 2010-07-15 16:26:03: post loose Message-ID: front right post on 3rd slot up from the bottom is loose From cbaxter at snf.stanford.edu Mon Jul 19 08:32:40 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 19 Jul 2010 08:32:40 -0700 Subject: Problem drytek2 SNF 2010-07-15 16:26:03: post loose Message-ID: From ludwig at snf.stanford.edu Tue Jul 27 11:59:34 2010 From: ludwig at snf.stanford.edu (ludwig at snf.stanford.edu) Date: Tue, 27 Jul 2010 11:59:34 -0700 Subject: Problem drytek2 SNF 2010-07-27 11:59:34: Descum Message-ID: The RF power is unstable and cannot be brought up to process parameters From gth at snf.stanford.edu Tue Jul 27 12:07:09 2010 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Tue, 27 Jul 2010 12:07:09 -0700 Subject: Problem drytek2 SNF 2010-07-27 12:07:09: RF power very low. Message-ID: From gth at snf.stanford.edu Tue Jul 27 12:20:03 2010 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Tue, 27 Jul 2010 12:20:03 -0700 Subject: Comment drytek2 SNF 2010-07-27 12:20:02: Coil Cap settings for Descum. Message-ID: Coil - 0 - 80 Cap - 7 - 20 From cbaxter at snf.stanford.edu Wed Jul 28 08:57:27 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 28 Jul 2010 08:57:27 -0700 Subject: Problem drytek2 SNF 2010-07-27 11:59:34: Descum Message-ID: Ran o2 plasma and able to tuned w/less than 5watts reflective and 500watts forward power. From cbaxter at snf.stanford.edu Wed Jul 28 08:57:46 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 28 Jul 2010 08:57:46 -0700 Subject: Problem drytek2 SNF 2010-07-27 12:07:09: RF power very low. Message-ID: From eenriquez at snf.stanford.edu Thu Jul 29 11:36:59 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 29 Jul 2010 11:36:59 -0700 Subject: Comment drytek2 SNF 2010-07-29 11:36:58: Tested OK after power outtage Message-ID: From lindaw at snf.stanford.edu Thu Jul 29 11:45:43 2010 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 29 Jul 2010 11:45:43 -0700 Subject: Problem drytek2 SNF 2010-07-29 11:45:43: 4th platen from top missing pin in front Message-ID: From eenriquez at snf.stanford.edu Fri Jul 30 10:22:15 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 30 Jul 2010 10:22:15 -0700 Subject: Comment drytek2 SNF 2010-07-30 10:22:14: Update platen pin Message-ID: A piece of the old pin is stuck in the pin holder. Will try to drill out the holder next week.