From bchui at california.com  Wed May  1 14:46:06 2002
From: bchui at california.com (Benjamin Chui)
Date: Wed, 01 May 2002 14:46:06 -0700
Subject: drytek2
Message-ID: <web-24931590@california.com>

At 2:40 pm I found drytek2 disabled, with the standby light
 on but vented to air.  I enabled it and put it in standby
 mode again this time making sure the chamber is pumped
 down. I think the problem the first time was that the
 "load complete" light was on.  In that case, the machine
 appears to start pumping down when going into standby mode
 but eventually vents again.  Make sure the "load complete"
 light is off before entering standby.

Ben Chui