From cbaxter at snf.stanford.edu Wed Nov 1 07:41:45 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 1 Nov 2006 07:41:45 -0800 Subject: Shutdown drytek4 SNF 2006-11-01 07:41:43: Need to change backing pump. Message-ID: From cbaxter at snf.stanford.edu Wed Nov 1 09:37:47 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 1 Nov 2006 09:37:47 -0800 Subject: Shutdown drytek4 SNF 2006-11-01 07:41:43: Need to change backing pump. Message-ID: Elmer and I changed backing main pump. From jonroth at snf.stanford.edu Mon Nov 6 20:01:09 2006 From: jonroth at snf.stanford.edu (jonroth at snf.stanford.edu) Date: Mon, 6 Nov 2006 20:01:09 -0800 Subject: Problem drytek4 SNF 2006-11-06 20:01:08: low electrode flow low Message-ID: low electrode flow low From cbaxter at snf.stanford.edu Wed Nov 8 15:11:12 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 8 Nov 2006 15:11:12 -0800 Subject: Problem drytek4 SNF 2006-11-06 20:01:08: low electrode flow low Message-ID: Flush lower electrode cooling line. From eenriquez at snf.stanford.edu Thu Nov 16 08:56:42 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 16 Nov 2006 08:56:42 -0800 Subject: Shutdown drytek4 SNF 2006-11-16 08:56:41: RF matching network repair Message-ID: From cbaxter at snf.stanford.edu Mon Nov 20 16:33:09 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 20 Nov 2006 16:33:09 -0800 Subject: Shutdown drytek4 SNF 2006-11-16 08:56:41: RF matching network repair Message-ID: Tuning procedure is back to normal procedure, temporary please "Do Not Use" process 1 for now till we replace the bad tuning pot for process 1. Process 2 and 3 are ok. From jimkruger at snf.stanford.edu Tue Nov 21 15:30:33 2006 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Tue, 21 Nov 2006 15:30:33 -0800 Subject: Problem drytek4 SNF 2006-11-21 15:30:33: No response to tuning on any process Message-ID: I can not hear the motors trying to tune. From tomada at snf.stanford.edu Tue Nov 21 16:18:23 2006 From: tomada at snf.stanford.edu (tomada at snf.stanford.edu) Date: Tue, 21 Nov 2006 16:18:23 -0800 Subject: Comment drytek4 SNF 2006-11-21 16:18:22: COnfirm RF tune not working Message-ID: for process 2 coil adjustment had no effect, reverse and forward power are the same. From cbaxter at snf.stanford.edu Wed Nov 22 10:52:13 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 22 Nov 2006 10:52:13 -0800 Subject: Comment drytek4 SNF 2006-11-21 16:18:22: COnfirm RF tune not working Message-ID: found reset switch on front panel at reset position(up) this enable system rest all the time and will try to auto match to limit and will keep motor driving. From cbaxter at snf.stanford.edu Wed Nov 22 10:52:20 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 22 Nov 2006 10:52:20 -0800 Subject: Problem drytek4 SNF 2006-11-21 15:30:33: No response to tuning on any process Message-ID: From eenriquez at snf.stanford.edu Mon Nov 27 08:51:20 2006 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 27 Nov 2006 08:51:20 -0800 Subject: Problem drytek4 SNF 2006-08-07 14:41:27: New temporary procedure for tuning RF Message-ID: Matching network controller has been repaired. From cbaxter at snf.stanford.edu Mon Nov 27 10:00:14 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 27 Nov 2006 10:00:14 -0800 Subject: Comment drytek4 SNF 2006-11-27 10:00:14: Problem Message-ID: We still have a problem with process 1 tunning pot and also, there is a problem with the automatch. Temporary leave either process 2 or 3 botton switch push on to keep the motors on the automatch from driving to limit all the time. From cbaxter at snf.stanford.edu Mon Nov 27 11:12:39 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 27 Nov 2006 11:12:39 -0800 Subject: Problem drytek4 SNF 2006-11-27 11:12:38: Problem Message-ID: We still have a problem on process 1 tunning pot and also, there is a problem with the automatch motors ,it continuously driving to max limit causing the coupler inside the match to break. Tempoary leave either process 2 or 3 botton switch push on after using the tool, this will prevent the motors on the automatch from driving to the limit all the time. The system is functional and it can be use, were hoping to have the problem resolve by the end of the week. From cbaxter at snf.stanford.edu Wed Nov 29 08:36:45 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 29 Nov 2006 08:36:45 -0800 Subject: Shutdown drytek4 SNF 2006-11-29 08:36:42: Changing process 1 tunning pot. Message-ID: From cbaxter at snf.stanford.edu Wed Nov 29 09:30:18 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 29 Nov 2006 09:30:18 -0800 Subject: Shutdown drytek4 SNF 2006-11-29 08:36:42: Changing process 1 tunning pot. Message-ID: Changed process 1 tunning pot and p i/o chips on cpu pcb. process 1 in now ok to use. From cbaxter at snf.stanford.edu Wed Nov 29 09:30:33 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 29 Nov 2006 09:30:33 -0800 Subject: Problem drytek4 SNF 2006-11-27 11:12:38: Problem Message-ID: From cbaxter at snf.stanford.edu Wed Nov 29 09:30:53 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 29 Nov 2006 09:30:53 -0800 Subject: Comment drytek4 SNF 2006-11-27 10:00:14: Problem Message-ID: