From jperez at snf.stanford.edu  Wed Mar 18 13:54:35 2009
From: jperez at snf.stanford.edu (jperez at snf.stanford.edu)
Date: Wed, 18 Mar 2009 13:54:35 -0700
Subject: Shutdown drytek4 SNF 2009-03-18 13:54:35: stand-by mode pressure climbing, should be between 200 to400 mTorr
Message-ID: <mailman.614.1357938328.25694.drytek4-pcs@snf.stanford.edu>

When I walked over, presure at 850 mTorr and after ten 
minutes pressure is still climbing and is at 1250 mTorr



From eenriquez at snf.stanford.edu  Wed Mar 18 15:35:23 2009
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Wed, 18 Mar 2009 15:35:23 -0700
Subject: Shutdown drytek4 SNF 2009-03-18 13:54:35: stand-by mode pressure climbing, should be between 200 to400 mTorr
Message-ID: <mailman.615.1357938328.25694.drytek4-pcs@snf.stanford.edu>

No problem found..  



From jimkruger at snf.stanford.edu  Fri Mar 20 13:57:25 2009
From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu)
Date: Fri, 20 Mar 2009 13:57:25 -0700
Subject: Problem drytek4 SNF 2009-03-20 13:57:25: Chamber lid lift slow / incomplete
Message-ID: <mailman.616.1357938328.25694.drytek4-pcs@snf.stanford.edu>

Lid does not go all the way up without help.



From cbaxter at snf.stanford.edu  Sun Mar 22 12:03:38 2009
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Sun, 22 Mar 2009 12:03:38 -0700
Subject: Problem drytek4 SNF 2009-03-20 13:57:25: Chamber lid lift slow / incomplete
Message-ID: <mailman.617.1357938328.25694.drytek4-pcs@snf.stanford.edu>

repaired air leak on bimba cylinder.