From cmprn153369 at gm20.com Thu Nov 7 13:43:44 2002 From: cmprn153369 at gm20.com (USB-Drive@usbpros.com) Date: Thu, 7 Nov 2002 16:43:44 -0500 (EST) Subject: Fact or Fiction: You can carry ALL of your data in your pocket.. Message-ID: <7915303.1036705424707.Kada.Kada2-93@email4.gm20.com> Imagine being able to copy all of your computer files (pictures, office documents, drivers, programs, etc.) onto a device that can be clipped to your key chain and put into your pocket. Imagine this device only weighing one ounce and roughly the size of a car key. Imagine being able to plug this device into any computer, PC or Mac, and having access to your data without the need to install any software or make any configuration change. Imagine being able to copy your files at over 1MB per second. Imagine the USB Drive! The USB Drive is extremely affordable and something that you will use on a daily basis. You could not buy someone a better gift. The USB Drive TM is an astonishing product. The drive works like a floppy disk but is durable and can hold over 200 times the amount of data. The USB Drive is virtually unbreakable, you can drop it, step on it, but it will not break. The USB Drive comes with a money back guarantee and a two-year warranty. It is impossible to wear it out: You can reuse the drive millions of times and it will still continue to work as new. Floppy and zip disks contain moving parts that eventually breakdown and your data becomes corrupt. The USB Drive contains no moving parts and you data will be safe for over 20 years. The USB Drive is a portable hard drive! It works just like a floppy disk! Simply copy your files to the USB Drive and you can take them anywhere. There is no setup or drivers to install. The USB works on all computers, PC's and MAC's. The USB Drives comes in different capacities from 32MB to 2GB! The USB Drive comes with a key ring, a 3-foot USB extension cable and a neck strap. On-Click LLC offers free shipping and our orders ship within 24-hours. You can order our USB Drives by clicking the orange 'add to shopping basket' buttons below, by visiting our website at http://gm12.com/r.html?c=153679&r=153369&t=79333406&l=1&d=43926925&u=http://www.usbpros.com,&g=0&f=-1 or by calling our toll free order desk at (866) 432-4022 M-F 9-6 Pacific Time. On-Click LLC is a member of the Better Business Bureau, Microsoft Certified Partner, HP Authorized Sales Center and HP Authorized Repair Center. Cancel my subscription click here: http://gm12.com/r.html?c=153679&r=153369&t=79333406&l=6&ea=etch at snf.stanford.edu. Or reply to this message with the word unsubscribe in the subject line. -------------- next part -------------- An HTML attachment was scrubbed... URL: From booth at snf.stanford.edu Mon Nov 11 08:46:15 2002 From: booth at snf.stanford.edu (Len Booth) Date: Mon, 11 Nov 2002 08:46:15 -0800 Subject: Etch Morning Report Nov 11, 2002 Message-ID: <3DCFDED7.82952B11@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 * Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest Shutdown Low DC bias fault Prometrix * P5000etch * RTAag NOT installed work in-progress RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Wed Nov 13 08:51:33 2002 From: booth at snf.stanford.edu (Len Booth) Date: Wed, 13 Nov 2002 08:51:33 -0800 Subject: Etch Morning Report Nov 13, 2002 Message-ID: <3DD28315.C2A1596F@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 * Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest * Prometrix * P5000etch * RTAag NOT installed work in-progress RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Thu Nov 14 09:35:06 2002 From: booth at snf.stanford.edu (Len Booth) Date: Thu, 14 Nov 2002 09:35:06 -0800 Subject: Etch Morning Report Nov 15, 2002 Message-ID: <3DD3DECA.5E8C985C@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 * Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest * Prometrix * P5000etch * RTAag NOT installed work in-progress RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Tue Nov 19 09:16:54 2002 From: booth at snf.stanford.edu (Len Booth) Date: Tue, 19 Nov 2002 09:16:54 -0800 Subject: Etch Morning Report Nov 19, 2002 Message-ID: <3DDA7206.6DCDC567@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 Problem slow initial chamber pumpdown Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest * Prometrix * P5000etch * RTAag * shutdown was cleared by Peter Griffin RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Wed Nov 20 08:53:48 2002 From: booth at snf.stanford.edu (Len Booth) Date: Wed, 20 Nov 2002 08:53:48 -0800 Subject: Etch Morning Report Nov 20, 2002 Message-ID: <3DDBBE1C.50F668F2@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 Problem slow initial chamber pumpdown Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest Shutdown pump failure Prometrix * P5000etch * RTAag * RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Fri Nov 22 08:56:05 2002 From: booth at snf.stanford.edu (Len Booth) Date: Fri, 22 Nov 2002 08:56:05 -0800 Subject: Etch Morning Report Nov 22, 2002 Message-ID: <3DDE61A5.98E27871@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 Shutdown base pressure not correct Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest * Prometrix * P5000etch * RTAag * RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Mon Nov 25 09:00:21 2002 From: booth at snf.stanford.edu (Len Booth) Date: Mon, 25 Nov 2002 09:00:21 -0800 Subject: Etch Morning Report Message-ID: <3DE25725.3B2B5E99@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 * Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest * Prometrix * P5000etch * RTAag * RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Tue Nov 26 08:34:51 2002 From: booth at snf.stanford.edu (Len Booth) Date: Tue, 26 Nov 2002 08:34:51 -0800 Subject: Etch Morning Report Nov 26, 2002 Message-ID: <3DE3A2AB.A0D7E595@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 * Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest * Prometrix * P5000etch * RTAag * RTAgaas NOT installed STSetch * Wafersaw * From booth at snf.stanford.edu Wed Nov 27 09:27:48 2002 From: booth at snf.stanford.edu (Len Booth) Date: Wed, 27 Nov 2002 09:27:48 -0800 Subject: Etch Morning Report Nov 27,2002 Message-ID: <3DE50094.6E894D32@snf.stanford.edu> Etch Group - Morning Equipment Status Report 9:00 am Astrisk (*) = equipment up & ready for use AG4108 Problem each user needs to verify Config values values will change if power-cycled AMTetcher Problem hexode rotation alarms, not affecting process Drytek1 * Drytek2 * Drytek4 * Lampoly * Lamsi NOT installed Gasonics Shutdown waiting for process recipe(s) to be developed, Jim McVittie Matrix * MRC * Pquest Shutdown Turbo backing pump needs repair Prometrix * P5000etch * RTAag * RTAgaas NOT installed STSetch * Wafersaw *