From vilanova at snf.stanford.edu  Mon May  3 14:33:11 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Mon, 3 May 2010 14:33:11 -0700
Subject: Problem evalign SNF 2010-04-19 13:40:37: bond chuck flags are badly mangled
Message-ID: <mailman.1032.1357938360.25704.evalign-pcs@snf.stanford.edu>

replaced defective flags. 



From mtan at snf.stanford.edu  Tue May 11 12:53:30 2010
From: mtan at snf.stanford.edu (mtan at snf.stanford.edu)
Date: Tue, 11 May 2010 12:53:30 -0700
Subject: Problem evalign SNF 2010-05-11 12:53:30: back side scope too dim
Message-ID: <mailman.1033.1357938360.25704.evalign-pcs@snf.stanford.edu>




From vilanova at snf.stanford.edu  Wed May 12 07:59:40 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Wed, 12 May 2010 07:59:40 -0700
Subject: Problem evalign SNF 2010-05-11 12:53:30: back side scope too dim
Message-ID: <mailman.1034.1357938360.25704.evalign-pcs@snf.stanford.edu>

the micrometer was missing a bearing , Lucky me I found it right next 
to the table , I put it back together and now the Backside Scopes
Are working properly, Ok to use., 



From vilanova at snf.stanford.edu  Tue May 18 11:32:27 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Tue, 18 May 2010 11:32:27 -0700
Subject: Shutdown evalign SNF 2010-05-18 11:32:27: Monthly lamp change............
Message-ID: <mailman.1035.1357938360.25704.evalign-pcs@snf.stanford.edu>




From vilanova at snf.stanford.edu  Tue May 18 15:18:12 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Tue, 18 May 2010 15:18:12 -0700
Subject: Shutdown evalign SNF 2010-05-18 11:32:27: Monthly lamp change............
Message-ID: <mailman.1036.1357938360.25704.evalign-pcs@snf.stanford.edu>

Monthly lamp change and calibration 
Intensity = 11.53mw/Cm2
Uniformity = 2.75%



From mtan at snf.stanford.edu  Thu May 20 16:27:56 2010
From: mtan at snf.stanford.edu (mtan at snf.stanford.edu)
Date: Thu, 20 May 2010 16:27:56 -0700
Subject: Problem evalign SNF 2010-05-20 16:27:55: machine is stuck, cannot initialize and cannot park
Message-ID: <mailman.1037.1357938360.25704.evalign-pcs@snf.stanford.edu>




From gsosa at snf.stanford.edu  Fri May 21 07:52:06 2010
From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu)
Date: Fri, 21 May 2010 07:52:06 -0700
Subject: Problem evalign SNF 2010-05-20 16:27:55: machine is stuck, cannot initialize and cannot park
Message-ID: <mailman.1038.1357938360.25704.evalign-pcs@snf.stanford.edu>

Re-initialized all hardware. All OK.



From vilanova at snf.stanford.edu  Thu May 27 08:17:04 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Thu, 27 May 2010 08:17:04 -0700
Subject: Comment evalign SNF 2010-05-27 08:17:03: Y Micrometer 
Message-ID: <mailman.1039.1357938360.25704.evalign-pcs@snf.stanford.edu>

Checked system and I found the Y micrometer missing the bearing
SO I decided to replace it, tested ok Ready to use.