From mahnaz at snf.stanford.edu Wed Oct 8 09:24:18 2003 From: mahnaz at snf.stanford.edu (Mahnaz Mansourpour) Date: Wed, 08 Oct 2003 09:24:18 -0700 Subject: Possible down time Message-ID: <3F843A32.C2B4167E@snf.stanford.edu> Hello all, There will be a possibility that to day 10/8 after 12:30 pm I will need the EV aligner. The Engineer from EV will be here to swap the BSA microscope with the loaner so ours could go back to factory to get fixed. Sorry for the late notice, the part just cleared the custom and there were a lot of confusion with it. If things change I will send out another email as I am on stand by for this afternoon visit. mahnaz From sanli at piezo.Stanford.EDU Mon Oct 20 11:37:23 2003 From: sanli at piezo.Stanford.EDU (Sanli Ergun) Date: Mon, 20 Oct 2003 11:37:23 -0700 (PDT) Subject: res. cancelled Message-ID: Found time on karlsuss2, done early. evalign is free till 1:30pm. From mahnaz at snf.stanford.edu Tue Oct 21 11:15:56 2003 From: mahnaz at snf.stanford.edu (Mahnaz Mansourpour) Date: Tue, 21 Oct 2003 11:15:56 -0700 Subject: up date Message-ID: <3F9577DC.AFCC64D6@snf.stanford.edu> Hello all Mike and I made some adjustment to the system. 1.5 um line and space are resolved with out any problem. We cleaned up some nasty stuff off the chuck. What is going on? You need to make sure the back of wafers are clean. mahnaz From ehkim at stanford.edu Wed Oct 22 17:06:19 2003 From: ehkim at stanford.edu (Eun-Ha Kim) Date: Wed, 22 Oct 2003 17:06:19 -0700 Subject: evalign free 5-6:30 today References: <3F9577DC.AFCC64D6@snf.stanford.edu> Message-ID: <010b01c398f9$7cc46430$316340ab@eunha> Sorry for this short notice. From rcandler at stanford.edu Thu Oct 30 14:34:15 2003 From: rcandler at stanford.edu (Rob Norris Candler) Date: Thu, 30 Oct 2003 14:34:15 -0800 (PST) Subject: evalign free 1530-1700 Message-ID: --------------------- Rob Candler Kenny Group attn: Rob Candler 551 Terman Engineering Center MC4021 Stanford, CA 94305 650-736-0044