From mahnaz at stanford.edu Thu Aug 24 15:19:54 2006 From: mahnaz at stanford.edu (Mahnaz Mansourpour) Date: Thu, 24 Aug 2006 15:19:54 -0700 Subject: electrode Message-ID: <44EE260A.2050106@stanford.edu> Hello all, The electrode has been damaged, I have asked for a quote and as soon as I get that I will order the part. Electrode is essential part of anodic bond so as of right now the damage one is in there, when closing the chamber extreme care needs to be taken. mahnaz From mahnaz at stanford.edu Fri Aug 25 16:43:33 2006 From: mahnaz at stanford.edu (Mahnaz Mansourpour) Date: Fri, 25 Aug 2006 16:43:33 -0700 Subject: New Rules Message-ID: <44EF8B25.8000405@stanford.edu> Hello all Please read carefully ... Here is the new rule for EVbonder. We had this rule while back when we had a lot of demand on anodic bond vs. silicon direct bond. With Anodic bonding we need to use the quartz plate and with direct bonding we need steel plate. The rule is that only staff changes the plate and trust me you do not want to be responsible to put the quartz plate in. Usually non of these are matter as we can go in and change the plates as labmembers request it. we encounter some problems when we have one of each that they need to use the system on the same day and they do not account for cooling time and ...etc. So starting Monday 8/28/06 Monday, Wednesday and Fridays will be for ANODIC bond meaning the quartz plate will be in. Tuesday, Thursday and weekend will be for Direct bonding meaning steel plate will be in place. This can change as we go along and users need will change. At this time I need to ask even superusers on the system do not change any plates ( it should be only one or two people at the this time). Any suggestion is welcome so please let me know if you have a better idea. mahnaz -------------- next part -------------- An HTML attachment was scrubbed... URL: