From mahnaz at snf.stanford.edu Thu Aug 3 10:14:04 2006 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 3 Aug 2006 10:14:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: so this morning is not working. From changyol at snf.stanford.edu Fri Aug 4 09:20:13 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 4 Aug 2006 09:20:13 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: input voltage from 24 v power supply for shutter get drop when give command to open shutter. I am working on it. From changyol at snf.stanford.edu Fri Aug 11 15:19:04 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:19:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: refer to next statement. From changyol at snf.stanford.edu Fri Aug 11 15:23:47 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:23:47 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: ground was floating on 24v dc due to not open shutter. found one of photo switching ic( MR25) was bad at 42 PN3 board. replaced with spare one. tested shutter and checked uniformity that came out good. ready to use. From mahnaz at snf.stanford.edu Thu Aug 3 10:14:04 2006 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 3 Aug 2006 10:14:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: so this morning is not working. From changyol at snf.stanford.edu Fri Aug 4 09:20:13 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 4 Aug 2006 09:20:13 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: input voltage from 24 v power supply for shutter get drop when give command to open shutter. I am working on it. From changyol at snf.stanford.edu Fri Aug 11 15:19:04 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:19:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: refer to next statement. From changyol at snf.stanford.edu Fri Aug 11 15:23:47 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:23:47 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: ground was floating on 24v dc due to not open shutter. found one of photo switching ic( MR25) was bad at 42 PN3 board. replaced with spare one. tested shutter and checked uniformity that came out good. ready to use. From mahnaz at snf.stanford.edu Thu Aug 3 10:14:04 2006 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 3 Aug 2006 10:14:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: so this morning is not working. From changyol at snf.stanford.edu Fri Aug 4 09:20:13 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 4 Aug 2006 09:20:13 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: input voltage from 24 v power supply for shutter get drop when give command to open shutter. I am working on it. From changyol at snf.stanford.edu Fri Aug 11 15:19:04 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:19:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: refer to next statement. From changyol at snf.stanford.edu Fri Aug 11 15:23:47 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:23:47 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: ground was floating on 24v dc due to not open shutter. found one of photo switching ic( MR25) was bad at 42 PN3 board. replaced with spare one. tested shutter and checked uniformity that came out good. ready to use. From mahnaz at snf.stanford.edu Thu Aug 3 10:14:04 2006 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 3 Aug 2006 10:14:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: so this morning is not working. From changyol at snf.stanford.edu Fri Aug 4 09:20:13 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 4 Aug 2006 09:20:13 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: input voltage from 24 v power supply for shutter get drop when give command to open shutter. I am working on it. From changyol at snf.stanford.edu Fri Aug 11 15:19:04 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:19:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: refer to next statement. From changyol at snf.stanford.edu Fri Aug 11 15:23:47 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:23:47 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: ground was floating on 24v dc due to not open shutter. found one of photo switching ic( MR25) was bad at 42 PN3 board. replaced with spare one. tested shutter and checked uniformity that came out good. ready to use. From mahnaz at snf.stanford.edu Thu Aug 3 10:14:04 2006 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 3 Aug 2006 10:14:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: so this morning is not working. From changyol at snf.stanford.edu Fri Aug 4 09:20:13 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 4 Aug 2006 09:20:13 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: input voltage from 24 v power supply for shutter get drop when give command to open shutter. I am working on it. From changyol at snf.stanford.edu Fri Aug 11 15:19:04 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:19:04 -0700 Subject: Shutdown evg-imprint SNF 2006-08-03 10:14:03: sshuteer was switched with one from ev aligner Message-ID: refer to next statement. From changyol at snf.stanford.edu Fri Aug 11 15:23:47 2006 From: changyol at snf.stanford.edu (changyol at snf.stanford.edu) Date: Fri, 11 Aug 2006 15:23:47 -0700 Subject: Problem evg-imprint SNF 2006-08-04 09:20:12: shutter problem Message-ID: ground was floating on 24v dc due to not open shutter. found one of photo switching ic( MR25) was bad at 42 PN3 board. replaced with spare one. tested shutter and checked uniformity that came out good. ready to use.