From rissman at snf.stanford.edu Mon Apr 12 17:21:27 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 12 Apr 2010 17:21:27 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: From rissman at snf.stanford.edu Tue Apr 13 12:07:52 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:07:52 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: Mahnaz and removed the maskholder and reseated the vacuum lines. The machine now holds the stamp. One additional bit of information is that the error message which shows up just after it is enabled (switch vacuum off?) showed up a few times. It seems a vacuum sensor was unhappy. From rissman at snf.stanford.edu Tue Apr 13 12:11:00 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:11:00 -0700 Subject: Problem evg-imprint SNF 2010-04-13 12:10:59: contact still an issue Message-ID: Mahnaz and I verified that contact was still an issue. She adjusted the "hard cont pressure" to 0,7 atm. It was at zero. From rissman at snf.stanford.edu Mon Apr 19 15:25:48 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 19 Apr 2010 15:25:48 -0700 Subject: Comment evg-imprint SNF 2010-04-19 15:25:47: replaced vacuum hose mount Message-ID: From rissman at snf.stanford.edu Mon Apr 12 17:21:27 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 12 Apr 2010 17:21:27 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: From rissman at snf.stanford.edu Tue Apr 13 12:07:52 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:07:52 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: Mahnaz and removed the maskholder and reseated the vacuum lines. The machine now holds the stamp. One additional bit of information is that the error message which shows up just after it is enabled (switch vacuum off?) showed up a few times. It seems a vacuum sensor was unhappy. From rissman at snf.stanford.edu Tue Apr 13 12:11:00 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:11:00 -0700 Subject: Problem evg-imprint SNF 2010-04-13 12:10:59: contact still an issue Message-ID: Mahnaz and I verified that contact was still an issue. She adjusted the "hard cont pressure" to 0,7 atm. It was at zero. From rissman at snf.stanford.edu Mon Apr 19 15:25:48 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 19 Apr 2010 15:25:48 -0700 Subject: Comment evg-imprint SNF 2010-04-19 15:25:47: replaced vacuum hose mount Message-ID: From rissman at snf.stanford.edu Mon Apr 12 17:21:27 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 12 Apr 2010 17:21:27 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: From rissman at snf.stanford.edu Tue Apr 13 12:07:52 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:07:52 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: Mahnaz and removed the maskholder and reseated the vacuum lines. The machine now holds the stamp. One additional bit of information is that the error message which shows up just after it is enabled (switch vacuum off?) showed up a few times. It seems a vacuum sensor was unhappy. From rissman at snf.stanford.edu Tue Apr 13 12:11:00 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:11:00 -0700 Subject: Problem evg-imprint SNF 2010-04-13 12:10:59: contact still an issue Message-ID: Mahnaz and I verified that contact was still an issue. She adjusted the "hard cont pressure" to 0,7 atm. It was at zero. From rissman at snf.stanford.edu Mon Apr 19 15:25:48 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 19 Apr 2010 15:25:48 -0700 Subject: Comment evg-imprint SNF 2010-04-19 15:25:47: replaced vacuum hose mount Message-ID: From rissman at snf.stanford.edu Mon Apr 12 17:21:27 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 12 Apr 2010 17:21:27 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: From rissman at snf.stanford.edu Tue Apr 13 12:07:52 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:07:52 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: Mahnaz and removed the maskholder and reseated the vacuum lines. The machine now holds the stamp. One additional bit of information is that the error message which shows up just after it is enabled (switch vacuum off?) showed up a few times. It seems a vacuum sensor was unhappy. From rissman at snf.stanford.edu Tue Apr 13 12:11:00 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:11:00 -0700 Subject: Problem evg-imprint SNF 2010-04-13 12:10:59: contact still an issue Message-ID: Mahnaz and I verified that contact was still an issue. She adjusted the "hard cont pressure" to 0,7 atm. It was at zero. From rissman at snf.stanford.edu Mon Apr 19 15:25:48 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 19 Apr 2010 15:25:48 -0700 Subject: Comment evg-imprint SNF 2010-04-19 15:25:47: replaced vacuum hose mount Message-ID: From rissman at snf.stanford.edu Mon Apr 12 17:21:27 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 12 Apr 2010 17:21:27 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: From rissman at snf.stanford.edu Tue Apr 13 12:07:52 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:07:52 -0700 Subject: Shutdown evg-imprint SNF 2010-04-12 17:21:26: will not mount stamp Message-ID: Mahnaz and removed the maskholder and reseated the vacuum lines. The machine now holds the stamp. One additional bit of information is that the error message which shows up just after it is enabled (switch vacuum off?) showed up a few times. It seems a vacuum sensor was unhappy. From rissman at snf.stanford.edu Tue Apr 13 12:11:00 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 13 Apr 2010 12:11:00 -0700 Subject: Problem evg-imprint SNF 2010-04-13 12:10:59: contact still an issue Message-ID: Mahnaz and I verified that contact was still an issue. She adjusted the "hard cont pressure" to 0,7 atm. It was at zero. From rissman at snf.stanford.edu Mon Apr 19 15:25:48 2010 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Mon, 19 Apr 2010 15:25:48 -0700 Subject: Comment evg-imprint SNF 2010-04-19 15:25:47: replaced vacuum hose mount Message-ID: