From gsosa at snf.stanford.edu Tue Jan 4 07:14:59 2011 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Tue, 4 Jan 2011 07:14:59 -0800 Subject: Shutdown evgspraycoat SNF 2011-01-04 07:14:58: System down Message-ID: System will not boot up. Need to troubleshoot problem From gsosa at snf.stanford.edu Tue Jan 4 15:55:18 2011 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Tue, 4 Jan 2011 15:55:18 -0800 Subject: Comment evgspraycoat SNF 2011-01-04 15:55:18: System status Message-ID: The computer bootted up Windows O/S OK. The EVG application software is requesting a new registration code. EVG notified. They are contacting Austria to provide the reg. code. Should have the code tomorrow 1/5. Will install and continue to bring tool up to an operational state. From gsosa at snf.stanford.edu Wed Jan 5 12:20:17 2011 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 5 Jan 2011 12:20:17 -0800 Subject: Comment evgspraycoat SNF 2011-01-04 15:55:18: System status Message-ID: Installed new registration code. EVG application software successfully booted up and all hardware initialized normally. Did thorough system clean including process bowl and chuck. Checked recirculation loop for leaks- All OK. Functional test of system OK with test job. System still needs a process qualification. From gsosa at snf.stanford.edu Wed Jan 5 12:20:30 2011 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 5 Jan 2011 12:20:30 -0800 Subject: Shutdown evgspraycoat SNF 2011-01-04 07:14:58: System down Message-ID: Installed new registration code. EVG application software successfully booted up and all hardware initialized normally. Did thorough system clean including process bowl and chuck. Checked recirculation loop for leaks- All OK. Functional test of system OK with test job. System still needs a process qualification. From gsosa at snf.stanford.edu Wed Jan 5 12:20:56 2011 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 5 Jan 2011 12:20:56 -0800 Subject: Problem evgspraycoat SNF 2011-01-05 12:20:56: Needs process testing 1/5 Message-ID: Installed new registration code. EVG application software successfully booted up and all hardware initialized normally. Did thorough system clean including process bowl and chuck. Checked recirculation loop for leaks- All OK. Functional test of system OK with test job. System still needs a process qualification. From mahnaz at snf.stanford.edu Fri Jan 7 12:58:54 2011 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Fri, 7 Jan 2011 12:58:54 -0800 Subject: Comment evgspraycoat SNF 2011-01-07 12:58:54: Mixing chemical Message-ID: Jason has kindly agreed to prep the chemical. We will test the system next Tuesday. From mahnaz at snf.stanford.edu Wed Jan 12 09:33:28 2011 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Wed, 12 Jan 2011 09:33:28 -0800 Subject: Problem evgspraycoat SNF 2011-01-05 12:20:56: Needs process testing 1/5 Message-ID: The system was checked with the same recipe we used before the Exhaust upgrade aand we do not see any changes. My thanks to Jason for all his help. From mahnaz at snf.stanford.edu Mon Jan 31 11:14:20 2011 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Mon, 31 Jan 2011 11:14:20 -0800 Subject: Shutdown evgspraycoat SNF 2011-01-31 11:14:19: system got reset Message-ID: i think that the lack of airflow caued the system to error out. the software reset it self . we are not able to reset the system till we get the passward from EVG. Gary already working on it. From gsosa at snf.stanford.edu Mon Jan 31 12:32:31 2011 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Mon, 31 Jan 2011 12:32:31 -0800 Subject: Shutdown evgspraycoat SNF 2011-01-31 11:14:19: system got reset Message-ID: Recieved new registration code from EVG tech support. Installed new registration code- OK (code accepted). Reset system hardware. Tested operation with dummy job- All OK.