From gsosa at stanford.edu  Fri Feb  1 07:36:24 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Fri, 1 Feb 2013 07:36:24 -0800 (PST)
Subject: [evgspraycoat-pcs] Problem evgspraycoat SNF 2013-02-01 07:36:23:
	Syringe problem
Message-ID: <28490946.7.1359732984119.JavaMail.coral@snc-coraldb.stanford.edu>

Users recipe is not starting because of a syringe error.

From gsosa at stanford.edu  Fri Feb  1 15:36:14 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Fri, 1 Feb 2013 15:36:14 -0800 (PST)
Subject: [evgspraycoat-pcs] Problem evgspraycoat SNF 2013-02-01
	07:36:23: Syringe problem
Message-ID: <24038107.18.1359761774863.JavaMail.coral@snc-coraldb.stanford.edu>

The system was not recognizing the syringe volume when doing a material change. Had to reset the EVG services to clear the problem. Tested system operation with users recipe and test recipe. All is functioning normally.

From gsosa at stanford.edu  Thu Feb  7 08:44:55 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Thu, 7 Feb 2013 08:44:55 -0800 (PST)
Subject: [evgspraycoat-pcs] Problem evgspraycoat SNF 2013-02-07 08:44:54:
	Dispense arm problem
Message-ID: <12390951.95.1360255495270.JavaMail.coral@snc-coraldb.stanford.edu>


From gsosa at stanford.edu  Tue Feb 12 13:25:48 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Tue, 12 Feb 2013 13:25:48 -0800 (PST)
Subject: [evgspraycoat-pcs] Problem evgspraycoat SNF 2013-02-07
 08:44:54: Dispense arm problem
Message-ID: <25961300.54.1360704348567.JavaMail.coral@snc-coraldb.stanford.edu>

Reseated power connectors at rear of power distribution module. System tested OK over several days. Also installed the permanent keycode for the EVG software.