From gsosa at stanford.edu  Thu Jan 17 12:44:21 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Thu, 17 Jan 2013 12:44:21 -0800 (PST)
Subject: [evgspraycoat-pcs] Comment evgspraycoat SNF 2013-01-17 12:44:20:
	Update 1/17
Message-ID: <6947018.5.1358455461102.JavaMail.coral@snc-coraldb.stanford.edu>

Troubleshot the mainswitch unit and determined that the 24 volt DC power supply was dead. Power supply is used for the EMO and interlock circiut. Placed order for new replacement power supply today. PO is being processed.

From gsosa at stanford.edu  Fri Jan 25 15:23:41 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Fri, 25 Jan 2013 15:23:41 -0800 (PST)
Subject: [evgspraycoat-pcs] Comment evgspraycoat SNF 2013-01-25 15:23:41:
	Update 1/25
Message-ID: <816441.7.1359156221562.JavaMail.coral@snc-coraldb.stanford.edu>

Installed new 24 volt power supply and re-installed the mainswitch unit. Powered up system. All appears to be normal. Took a screen capture of registration page. Will email it to EVG and request new keycode.

From gsosa at stanford.edu  Tue Jan 29 08:53:01 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Tue, 29 Jan 2013 08:53:01 -0800 (PST)
Subject: [evgspraycoat-pcs] Shutdown evgspraycoat SNF 2013-01-08
	07:13:08: Needs keycode
Message-ID: <13690488.50.1359478381367.JavaMail.coral@snc-coraldb.stanford.edu>

Unable to power up system. Troubleshot and determined that the 24 VDC power supply in the mainswith unit was bad. The power supply is used for the EMO/interlock circuit. Replaced the power supply. Installed new registration key-code to activate software. Did several dry-run tests to verify system operation. All OK.

From gsosa at stanford.edu  Tue Jan 29 08:53:07 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Tue, 29 Jan 2013 08:53:07 -0800 (PST)
Subject: [evgspraycoat-pcs] Shutdown evgspraycoat SNF 2013-01-08
	10:55:26: No Power
Message-ID: <13287953.51.1359478387392.JavaMail.coral@snc-coraldb.stanford.edu>

Unable to power up system. Troubleshot and determined that the 24 VDC power supply in the mainswith unit was bad. The power supply is used for the EMO/interlock circuit. Replaced the power supply. Installed new registration key-code to activate software. Did several dry-run tests to verify system operation. All OK.

From gsosa at stanford.edu  Tue Jan 29 08:53:21 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Tue, 29 Jan 2013 08:53:21 -0800 (PST)
Subject: [evgspraycoat-pcs] Comment evgspraycoat SNF 2013-01-17
	12:44:20: Update 1/17
Message-ID: <14005505.52.1359478401432.JavaMail.coral@snc-coraldb.stanford.edu>

Unable to power up system. Troubleshot and determined that the 24 VDC power supply in the mainswith unit was bad. The power supply is used for the EMO/interlock circuit. Replaced the power supply. Installed new registration key-code to activate software. Did several dry-run tests to verify system operation. All OK.

From gsosa at stanford.edu  Tue Jan 29 08:53:26 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Tue, 29 Jan 2013 08:53:26 -0800 (PST)
Subject: [evgspraycoat-pcs] Comment evgspraycoat SNF 2013-01-25
	15:23:41: Update 1/25
Message-ID: <4222767.53.1359478406455.JavaMail.coral@snc-coraldb.stanford.edu>

Unable to power up system. Troubleshot and determined that the 24 VDC power supply in the mainswith unit was bad. The power supply is used for the EMO/interlock circuit. Replaced the power supply. Installed new registration key-code to activate software. Did several dry-run tests to verify system operation. All OK.

From gsosa at stanford.edu  Tue Jan 29 08:53:51 2013
From: gsosa at stanford.edu (gsosa at stanford.edu)
Date: Tue, 29 Jan 2013 08:53:51 -0800 (PST)
Subject: [evgspraycoat-pcs] Comment evgspraycoat SNF 2013-01-29 08:53:50:
	System up 1/29
Message-ID: <17202657.54.1359478431515.JavaMail.coral@snc-coraldb.stanford.edu>

Unable to power up system. Troubleshot and determined that the 24 VDC power supply in the mainswith unit was bad. The power supply is used for the EMO/interlock circuit. Replaced the power supply. Installed new registration key-code to activate software. Did several dry-run tests to verify system operation. All OK.