From gth at snf.stanford.edu Wed Oct 10 23:39:25 2007 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Wed, 10 Oct 2007 23:39:25 -0700 Subject: Problem fga2 SNF 2007-10-10 23:39:25: crack in the elephant quartz tube. Message-ID: From mdickey at snf.stanford.edu Thu Oct 11 06:48:31 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Thu, 11 Oct 2007 06:48:31 -0700 Subject: Comment fga2 SNF 2007-10-11 06:48:29: Tube crack Message-ID: The elephant is not cracked. There is a very small chip on the tube surface opening. It is not a factor for process. Will have process staff verify today. From latta at snf.stanford.edu Thu Oct 11 09:18:27 2007 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 11 Oct 2007 09:18:27 -0700 Subject: Problem fga2 SNF 2007-10-10 23:39:25: crack in the elephant quartz tube. Message-ID: Looked for a crack, but didn't find one. Is the repair being called a crack? Will discuss with labmember. From latta at snf.stanford.edu Thu Oct 11 09:19:33 2007 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 11 Oct 2007 09:19:33 -0700 Subject: Comment fga2 SNF 2007-10-11 06:48:29: Tube crack Message-ID: Verifed that there is no crack or chip that would affect the operation of the furnace. Will check with oringinal poster. From gth at snf.stanford.edu Fri Oct 26 20:09:18 2007 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Fri, 26 Oct 2007 20:09:18 -0700 Subject: Problem fga2 SNF 2007-10-26 20:09:17: seem to be out of FGA. Message-ID: hi i was doing a FGA300 for 30 min. the level of FGA is continously falling. maybe we are running out of FGA. please check From gth at snf.stanford.edu Fri Oct 26 20:15:30 2007 From: gth at snf.stanford.edu (gth at snf.stanford.edu) Date: Fri, 26 Oct 2007 20:15:30 -0700 Subject: Problem fga2 SNF 2007-10-26 20:15:29: no FGA Message-ID: I am pretty sure. The knob was fully open for FGA and the level was constantly falling down. I barely managed to finish my FGA run ! From tberg at snf.stanford.edu Tue Oct 30 06:48:33 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Oct 2007 06:48:33 -0700 Subject: Problem fga2 SNF 2007-10-26 20:15:29: no FGA Message-ID: Changed to other cylinders From tberg at snf.stanford.edu Tue Oct 30 06:48:51 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Oct 2007 06:48:51 -0700 Subject: Problem fga2 SNF 2007-10-26 20:09:17: seem to be out of FGA. Message-ID: Changed to other cylinders From megrubbs at snf.stanford.edu Tue Oct 30 10:54:10 2007 From: megrubbs at snf.stanford.edu (megrubbs at snf.stanford.edu) Date: Tue, 30 Oct 2007 10:54:10 -0700 Subject: Problem fga2 SNF 2007-10-30 10:54:09: broken pull rod... Message-ID: .. pieces are on the loading deck From mdickey at snf.stanford.edu Tue Oct 30 13:23:55 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 30 Oct 2007 13:23:55 -0700 Subject: Problem fga2 SNF 2007-10-30 10:54:09: broken pull rod... Message-ID: Pull rod is not broken From tberg at snf.stanford.edu Tue Oct 30 13:36:34 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Oct 2007 13:36:34 -0700 Subject: Comment fga2 SNF 2007-10-30 13:36:33: There is a pull rod at the Tube Message-ID: