From tberg at snf.stanford.edu Thu Feb 9 06:12:09 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 9 Feb 2012 06:12:09 -0800 Subject: Comment fga2 SNF 2010-10-29 16:45:06: Forming gas was left ON Message-ID: noted From tberg at snf.stanford.edu Thu Feb 9 06:12:37 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 9 Feb 2012 06:12:37 -0800 Subject: Comment fga2 SNF 2010-12-03 09:41:28: idle conditions Message-ID: noted From tberg at snf.stanford.edu Thu Feb 9 06:12:53 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 9 Feb 2012 06:12:53 -0800 Subject: Comment fga2 SNF 2011-11-21 13:59:04: forming gas Message-ID: noted From tberg at snf.stanford.edu Tue Feb 14 13:51:15 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 14 Feb 2012 13:51:15 -0800 Subject: Shutdown fga2 SNF 2011-12-13 07:41:10: renovation Message-ID: System is back on needs a test From latta at snf.stanford.edu Thu Feb 16 10:38:27 2012 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 16 Feb 2012 10:38:27 -0800 Subject: Comment fga2 SNF 2010-10-28 11:37:58: sample holder Message-ID: archived From latta at snf.stanford.edu Thu Feb 16 11:17:21 2012 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 16 Feb 2012 11:17:21 -0800 Subject: Problem fga2 SNF 2011-12-09 13:40:19: pulling rob broken Message-ID: archived From latta at snf.stanford.edu Thu Feb 16 11:19:19 2012 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 16 Feb 2012 11:19:19 -0800 Subject: Comment fga2 SNF 2012-02-16 11:19:19: Checked tube operation Message-ID: There is no specific qual for fga2 so I checked the gases, fga, Ar and N2 all work fine, temp controller controls fine too. The pull rod needs to be replaced due to a broken tip. From seymour at snf.stanford.edu Fri Feb 17 07:09:14 2012 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 17 Feb 2012 07:09:14 -0800 Subject: Comment fga2 SNF 2012-02-17 07:09:14: pull rod replaced Message-ID: