From nlatta at stanford.edu  Tue Oct 27 13:44:32 2009
From: nlatta at stanford.edu (Nancy Latta)
Date: Tue, 27 Oct 2009 13:44:32 -0700
Subject: FGA2 has moved!
Message-ID: <4AE75BB0.9030008@stanford.edu>

Hi Everyone,

FGA2 has moved to the furnace slot right above where it used to be.  
This is because the fuses keep blowing in the old location.

Most everything is the same.  The coral enable is to fga2, the temp 
readout is position 2 on the dial and the gases are adjusted in the same 
place as before.

The only change is that temp is adjusted at the top center position.  It 
is clearly marked.

Please let me know if you have any questions.

Thanks,

-Nancy