From shott at snf.stanford.edu Tue Nov 7 17:06:21 2006 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Tue, 7 Nov 2006 17:06:21 -0800 Subject: Shutdown fusion SNF 2006-11-07 17:06:21: Drain water on floor Message-ID: It appears as if the 1 1/2 drain line does not have an end piece and as a result water in that drain line end up on the floor rather than in the drain system. I got a call at about 4:25 p.m. from work control indicating a "Lab Leak" alarm. The tracetek was in alarm with a reading of (I think) about 487 that put it in FW 15. Looks like a total of about 1.5 to 2 gallons of water. Paul and I put out a number of wipes to absorb most of the water in FW15 and near the Fusion. The joint about 36 inches to the right of the missing cap also looks a bit suspect. Thanks, John From cbaxter at snf.stanford.edu Tue Nov 21 09:25:58 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Tue, 21 Nov 2006 09:25:58 -0800 Subject: Shutdown fusion SNF 2006-11-07 17:06:21: Drain water on floor Message-ID: Repaired leak on drain line. From cbaxter at snf.stanford.edu Wed Nov 29 07:52:35 2006 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 29 Nov 2006 07:52:35 -0800 Subject: Comment fusion SNF 2006-11-29 07:52:34: Message-ID: When running the tool, make sure the system is on batch mode.