From mtang at snf.stanford.edu Fri Jul 13 09:42:02 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Fri, 13 Jul 2007 09:42:02 -0700 Subject: Shutdown headway2 SNF 2007-07-13 09:42:02: Intermittent odors observed Message-ID: Odors have been reported to come intermittently when this is used. The system will remain down while being investigated. From gsosa at snf.stanford.edu Fri Jul 13 14:20:41 2007 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Fri, 13 Jul 2007 14:20:41 -0700 Subject: Shutdown headway2 SNF 2007-07-13 09:42:02: Intermittent odors observed Message-ID: Removed the coater and found exhaust hose to bottom of coater disconnected. Re-installed the exhaust hose and secured with a hose clamp. THere is now exhaust flow inside of the coater bowl. Verified exhaust inside plenum- OK. Checked airflowat front edge of wet deck near breathing zone. Airflow was 100 to 150 Ft/min using a hotwire annemometer. System ready for use. From erichall at snf.stanford.edu Fri Jul 27 08:27:53 2007 From: erichall at snf.stanford.edu (erichall at snf.stanford.edu) Date: Fri, 27 Jul 2007 08:27:53 -0700 Subject: Problem headway2 SNF 2007-07-27 08:27:52: Vacuum Pedal, No Spin Problems Message-ID: The headway2 seems to be malfunctioning. When pressing the vacuum pedal, the vacuum doesn't stay on. Even when the pedal is held down, no spin results. Assistance would be greatly appreciated. From vilanova at snf.stanford.edu Fri Jul 27 08:38:48 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 27 Jul 2007 08:38:48 -0700 Subject: Problem headway2 SNF 2007-07-27 08:27:52: Vacuum Pedal, No Spin Problems Message-ID: Chuck was not inserted properly , re inserted the chuck , system working Fine . From haniff at snf.stanford.edu Tue Jul 31 11:48:26 2007 From: haniff at snf.stanford.edu (haniff at snf.stanford.edu) Date: Tue, 31 Jul 2007 11:48:26 -0700 Subject: Problem headway2 SNF 2007-07-31 11:48:25: spinner/chuck not level Message-ID: Resist rolls off wafer to the back From jwc at snf.stanford.edu Tue Jul 31 12:31:46 2007 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 31 Jul 2007 12:31:46 -0700 Subject: Problem headway2 SNF 2007-07-31 12:31:46: no photocassettes availabke for users!!! Message-ID: we will need to pruchase and provide to users more photocassettes. Could not complete tasking for training class From jwc at snf.stanford.edu Tue Jul 31 13:09:53 2007 From: jwc at snf.stanford.edu (James Conway) Date: Tue, 31 Jul 2007 13:09:53 -0700 Subject: Problem headway2 SNF 2007-07-31 11:48:25: spinner/chuck not level Message-ID: <46AF9711.6080607@snf.stanford.edu> Spinner chucks are very contaminated. Stripping and cleaning in the resist hot pot used for the spinner bowls I will retrieve later this afternoon... \ James haniff at snf.stanford.edu wrote: > Resist rolls off wafer to the back > > -------------- next part -------------- An HTML attachment was scrubbed... URL: