From razevedo at snf.stanford.edu Thu Oct 4 10:34:03 2007 From: razevedo at snf.stanford.edu (razevedo at snf.stanford.edu) Date: Thu, 4 Oct 2007 10:34:03 -0700 Subject: Problem headway2 SNF 2007-10-04 10:34:03: white residue on benchtop Message-ID: There is some small spots of thick white film on the benchtop (cool grease comes to mind, but not sure what it is). Tried to wipe up, but difficult to remove even with acetone soaked technicloth. Doesn't impede headway use. From vilanova at snf.stanford.edu Thu Oct 4 10:46:40 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 4 Oct 2007 10:46:40 -0700 Subject: Comment headway2 SNF 2007-08-20 09:08:28: countertop dirty Message-ID: cleaned. From vilanova at snf.stanford.edu Thu Oct 4 10:46:58 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 4 Oct 2007 10:46:58 -0700 Subject: Problem headway2 SNF 2007-10-04 10:34:03: white residue on benchtop Message-ID: cleaned!. :-) From jwc at snf.stanford.edu Fri Oct 19 16:06:44 2007 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 19 Oct 2007 16:06:44 -0700 Subject: Comment headway2 SNF 2007-09-26 11:10:35: cleaned chucks Message-ID: From jwc at snf.stanford.edu Fri Oct 19 16:07:06 2007 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 19 Oct 2007 16:07:06 -0700 Subject: Comment headway2 SNF 2007-08-24 10:33:28: Freeing up middle of my 8/24 reservation Message-ID: From jwc at snf.stanford.edu Fri Oct 19 16:07:15 2007 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 19 Oct 2007 16:07:15 -0700 Subject: Comment headway2 SNF 2007-08-01 11:29:38: Clean chucks Message-ID: From mwiemer at snf.stanford.edu Sat Oct 27 11:38:12 2007 From: mwiemer at snf.stanford.edu (mwiemer at snf.stanford.edu) Date: Sat, 27 Oct 2007 11:38:12 -0700 Subject: Shutdown headway2 SNF 2007-10-27 11:38:12: Motor Died? Message-ID: The headway sucks samples down to the chuck, but does not spin. This is not the simple problem of resist gumming up the chuck or suction, there is something wrong with the motor. From vilanova at snf.stanford.edu Mon Oct 29 07:36:47 2007 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 29 Oct 2007 07:36:47 -0700 Subject: Shutdown headway2 SNF 2007-10-27 11:38:12: Motor Died? Message-ID: replaced blown fuse, cycled wafer, Ready to use.