From altamash at snf.stanford.edu Tue Aug 2 09:56:51 2011 From: altamash at snf.stanford.edu (altamash at snf.stanford.edu) Date: Tue, 2 Aug 2011 09:56:51 -0700 Subject: Comment headway2 SNF 2011-08-02 09:56:51: some kind of red resist on the bench Message-ID: between the hot plate and the spinner. Could not clean with acetone/methanol/ipa, probably it is LOL. From vilanova at snf.stanford.edu Wed Aug 3 08:10:41 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 3 Aug 2011 08:10:41 -0700 Subject: Comment headway2 SNF 2011-08-02 09:56:51: some kind of red resist on the bench Message-ID: Cleaned Bench and Also I Replaced one of the 4" chucks Teflon Insert, Tested it , Ok to use. From mtang at snf.stanford.edu Sat Aug 13 06:56:22 2011 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Sat, 13 Aug 2011 06:56:22 -0700 Subject: Comment headway2 SNF 2011-08-13 06:56:21: hot plate problem Message-ID: A labmember reports that the hot plate display is flashing instead of constant and that the temperature doesn't seem correct. Maintenance has been informed. Recommend using other hot plates for now. Make sure to transport coated wafers in an appropriately enclosed container. From vilanova at stanford.edu Sat Aug 13 08:07:44 2011 From: vilanova at stanford.edu (Eddy M Vilanova) Date: Sat, 13 Aug 2011 08:07:44 -0700 (PDT) Subject: Comment headway2 SNF 2011-08-13 06:56:21: hot plate problem In-Reply-To: <20110813135622.7F8AB52F5@smtp-unencrypted.stanford.edu> Message-ID: <1760999109.1212968.1313248064761.JavaMail.root@zm05.stanford.edu> - Which one ? The one next to headway or laurell??? Mario V. ---- Original Message ----- From: mtang at snf.stanford.edu To: headway2-pcs at snf.stanford.edu Sent: Sat, 13 Aug 2011 06:56:22 -0700 (PDT) Subject: Comment headway2 SNF 2011-08-13 06:56:21: hot plate problem A labmember reports that the hot plate display is flashing instead of constant and that the temperature doesn't seem correct. Maintenance has been informed. Recommend using other hot plates for now. Make sure to transport coated wafers in an appropriately enclosed container. From shott at stanford.edu Sat Aug 13 08:47:54 2011 From: shott at stanford.edu (John Shott) Date: Sat, 13 Aug 2011 08:47:54 -0700 Subject: Comment headway2 SNF 2011-08-13 06:56:21: hot plate problem In-Reply-To: <1760999109.1212968.1313248064761.JavaMail.root@zm05.stanford.edu> References: <1760999109.1212968.1313248064761.JavaMail.root@zm05.stanford.edu> Message-ID: <4E469CAA.1010007@stanford.edu> Mario: I think that it is the one to the left of headway2. If you power it up, characters flash from left to right. One set looks like it is O-S-P (probably over set point?) and occasionally some random numbers. I've got it powered off at the moment with a note not to use it until you or Gary have a chance to check it out. Thanks, John From vilanova at snf.stanford.edu Wed Aug 17 14:43:51 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 17 Aug 2011 14:43:51 -0700 Subject: Comment headway2 SNF 2011-08-13 06:56:21: hot plate problem Message-ID: Replaced Broken Hotplate. From raneeyoo at snf.stanford.edu Thu Aug 18 22:57:26 2011 From: raneeyoo at snf.stanford.edu (raneeyoo at snf.stanford.edu) Date: Thu, 18 Aug 2011 22:57:26 -0700 Subject: Problem headway2 SNF 2011-08-18 22:57:25: motor did not move Message-ID: after 1 test wafer coating, the chuck did not move. please check it. thanks. From vilanova at snf.stanford.edu Fri Aug 19 08:09:25 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 19 Aug 2011 08:09:25 -0700 Subject: Problem headway2 SNF 2011-08-18 22:57:25: motor did not move Message-ID: FOund Resist residues Inside the Spindle shaft, Cleaned and replaced Burned Fuse, tested ok , Ready to use.