From vilanova at snf.stanford.edu Thu Apr 12 10:37:27 2012 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 12 Apr 2012 10:37:27 -0700 Subject: Comment headway2 SNF 2012-04-12 10:37:26: Hotplate Next to Headway Spinner Message-ID: I've Removed the Hotplate Next to Headway Spinner, Per James Conway's Request. From mahnaz at snf.stanford.edu Thu Apr 12 12:17:49 2012 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 12 Apr 2012 12:17:49 -0700 Subject: Shutdown headway2 SNF 2012-04-12 12:17:48: Vaccume issue Message-ID: Shaft spins without chuck. Big mess left behind, all cleaned up. From vilanova at snf.stanford.edu Thu Apr 12 13:23:39 2012 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 12 Apr 2012 13:23:39 -0700 Subject: Shutdown headway2 SNF 2012-04-12 12:17:48: Vaccume issue Message-ID: Cleaned Up Spindle and chuck , Checked Vacuum and Tested, Cleaned Up Bench and Headway Bowl. Ok to use. PLEASE CLEAN THE CHUCKS AFTER EVERY USE. From apal at snf.stanford.edu Thu Apr 12 17:14:28 2012 From: apal at snf.stanford.edu (apal at snf.stanford.edu) Date: Thu, 12 Apr 2012 17:14:28 -0700 Subject: Comment headway2 SNF 2012-04-12 17:14:27: Aluminum foil change Message-ID: Cannot pull up the lid -- hence cannot change the aluminum foil inside. From vilanova at snf.stanford.edu Fri Apr 13 08:03:00 2012 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 13 Apr 2012 08:03:00 -0700 Subject: Comment headway2 SNF 2012-04-12 17:14:27: Aluminum foil change Message-ID: Pushed In and the Lid will Open , To close it back push In and Turn the Knob Clockwise. Replaced The Foil and Closed Lid. From vilanova at snf.stanford.edu Fri Apr 27 11:01:30 2012 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 27 Apr 2012 11:01:30 -0700 Subject: Comment headway2 SNF 2012-04-27 11:01:30: Clogged Vacuum Message-ID: A User Reported To me System vacuum Failure, Cleaned Spindle , Cleaned chucks and replaced orings, Tested, Vacuum working Fine, Ok to use.