From jperez at snf.stanford.edu Mon Jun 3 11:54:28 2002 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Jun 3, 2002 11:54:28 AM Subject: Problem innotec 2002-06-03 11:54:27: Pressure raises after cross over Message-ID: From jperez at snf.stanford.edu Mon Jun 3 11:56:19 2002 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Jun 3, 2002 11:56:19 AM Subject: Shutdown innotec 2002-06-03 11:56:18: Jim will work on ion gauge Message-ID: From jhaydon at snf.stanford.edu Mon Jun 3 12:27:37 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 3, 2002 12:27:37 PM Subject: Shutdown innotec 2002-06-03 11:56:18: Jim will work on ion gauge Message-ID: replaced ion gauge ok to test From jhaydon at snf.stanford.edu Mon Jun 3 12:28:15 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 3, 2002 12:28:15 PM Subject: Problem innotec 2002-06-03 11:54:27: Pressure raises after cross over Message-ID: probably due to ion gauge problem From jhaydon at snf.stanford.edu Mon Jun 3 12:28:48 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 3, 2002 12:28:48 PM Subject: Problem innotec 2002-05-30 19:08:46: Lost Telemark Power Message-ID: most likely due to ino gauge fault From jhaydon at snf.stanford.edu Tue Jun 4 08:11:40 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 4, 2002 8:11:40 AM Subject: Shutdown innotec 2002-06-04 08:11:39: problem with ion gauge controler Message-ID: From jhaydon at snf.stanford.edu Wed Jun 5 05:02:38 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 5, 2002 5:02:38 PM Subject: Shutdown innotec 2002-06-04 08:11:39: problem with ion gauge controler Message-ID: problem appears to have been the cryo pump set point From jhaydon at snf.stanford.edu Wed Jun 5 05:03:11 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 5, 2002 5:03:11 PM Subject: Problem innotec 2002-06-05 17:03:10: ok to use after regen is complete Message-ID: From maurice at snf.stanford.edu Fri Jun 7 11:58:14 2002 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Jun 7, 2002 11:58:14 AM Subject: Shutdown innotec 2002-06-07 11:58:13: No High Voltage Message-ID: From maurice at snf.stanford.edu Fri Jun 7 03:50:51 2002 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Jun 7, 2002 3:50:51 PM Subject: Shutdown innotec 2002-06-07 11:58:13: No High Voltage Message-ID: Jim reset breaker From maurice at snf.stanford.edu Fri Jun 7 03:51:07 2002 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Jun 7, 2002 3:51:07 PM Subject: Problem innotec 2002-06-05 17:03:10: ok to use after regen is complete Message-ID: complete From jperez at snf.stanford.edu Fri Jun 7 05:27:08 2002 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Jun 7, 2002 5:27:08 PM Subject: Problem innotec 2002-06-07 17:27:07: Need to calibrate the tooling factor in the controller Message-ID: From jperez at snf.stanford.edu Wed Jun 12 03:16:15 2002 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Jun 12, 2002 3:16:15 PM Subject: Problem innotec 2002-06-12 15:16:14: Clips (2) missing from 1 wfr holder on planetary Message-ID: We need to fill all wafer holders. From jhaydon at snf.stanford.edu Fri Jun 14 01:23:35 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 14, 2002 1:23:35 PM Subject: Problem innotec 2002-06-12 15:16:14: Clips (2) missing from 1 wfr holder on planetary Message-ID: planetary has a couple of bad wafer holders you should check before using they will be fixed by next shield cleaning From jhaydon at snf.stanford.edu Tue Jun 18 10:41:40 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 18, 2002 10:41:40 AM Subject: Shutdown innotec 2002-06-18 10:41:39: shut down for oil change Message-ID: From jhaydon at snf.stanford.edu Tue Jun 18 11:37:07 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Jun 18, 2002 11:37:07 AM Subject: Shutdown innotec 2002-06-18 10:41:39: shut down for oil change Message-ID: oil change completed ok to use From maurice at snf.stanford.edu Thu Jun 20 02:16:12 2002 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Jun 20, 2002 2:16:12 PM Subject: Comment innotec 2002-06-20 14:16:11: 2:00 reservation cancelled for today Message-ID: From maurice at snf.stanford.edu Thu Jun 27 08:51:08 2002 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Jun 27, 2002 8:51:08 AM Subject: Comment innotec 2002-06-27 08:50:54: 9:00 reservation cancelled Message-ID: