From jhaydon at snf.stanford.edu Thu Oct 3 08:12:04 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Oct 3, 2002 8:12:04 AM Subject: Shutdown innotec 2002-10-03 08:12:03: down for shield replacement Message-ID: From jhaydon at snf.stanford.edu Fri Oct 4 09:27:32 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Oct 4, 2002 9:27:32 AM Subject: Shutdown innotec 2002-10-03 08:12:03: down for shield replacement Message-ID: new shielding installed and cryo regend ok to use after aluminum predep From jperez at snf.stanford.edu Mon Oct 7 09:24:00 2002 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Oct 7, 2002 9:24:00 AM Subject: Shutdown innotec 2002-10-07 09:23:59: Planetary binding Message-ID: Unable to rotate planetary smoothly. From jhaydon at snf.stanford.edu Tue Oct 8 07:33:46 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Oct 8, 2002 7:33:46 AM Subject: Shutdown innotec 2002-10-07 09:23:59: Planetary binding Message-ID: planetary fixed ok to use From lsmoore at snf.stanford.edu Wed Oct 9 09:30:16 2002 From: lsmoore at snf.stanford.edu (lsmoore at snf.stanford.edu) Date: Oct 9, 2002 9:30:16 PM Subject: Problem innotec 2002-10-09 21:30:15: no vacuum Message-ID: i just tried for the last 30 min to close the bell jar, but the right hand side of the bell is >1mm open. also, the planetary was so loud that i couldn't have it rotating during my evap. i put the maintenance sin on it. From lsmoore at snf.stanford.edu Wed Oct 9 09:32:10 2002 From: lsmoore at snf.stanford.edu (lsmoore at snf.stanford.edu) Date: Oct 9, 2002 9:32:10 PM Subject: Shutdown innotec 2002-10-09 21:32:10: no vacuum Message-ID: the innotec cannot be used until the bell-jar can be closed so that it can be under vacuum again. From jhaydon at snf.stanford.edu Thu Oct 10 09:02:26 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Oct 10, 2002 9:02:26 AM Subject: Shutdown innotec 2002-10-09 21:32:10: no vacuum Message-ID: upper shield came lose an caused the bell jar to go askew and prevent it from pumping down From jhaydon at snf.stanford.edu Thu Oct 10 09:02:38 2002 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Oct 10, 2002 9:02:38 AM Subject: Problem innotec 2002-10-09 21:30:15: no vacuum Message-ID: