From hendrikb at snf.stanford.edu  Tue Mar 11 07:40:27 2003
From: hendrikb at snf.stanford.edu (hendrikb at snf.stanford.edu)
Date: Mar 11, 2003 7:40:27 PM
Subject: Problem innotec 2003-03-11 19:40:26: Frequent crystal failures
Message-ID: <mailman.149.1357938397.25732.innotec-pcs@snf.stanford.edu>

Sometimes due to crystal drawer slipping half way out - contact problem? Last run, the rate only dropped to 0, without reporting a crystal failure.
Besides that, the gold supply could do with a refill.



From jhaydon at snf.stanford.edu  Fri Mar 14 08:32:07 2003
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Mar 14, 2003 8:32:07 AM
Subject: Problem innotec 2003-03-11 19:40:26: Report Clear for innotec
Message-ID: <mailman.150.1357938397.25732.innotec-pcs@snf.stanford.edu>

the crystal does slip out some times it is important to check it before pumping down. I will try to find a way to better secure it. It is ok to use



From quickwin at snf.stanford.edu  Wed Mar 19 07:56:45 2003
From: quickwin at snf.stanford.edu (quickwin at snf.stanford.edu)
Date: Mar 19, 2003 7:56:45 PM
Subject: Problem innotec 2003-03-19 19:56:42: Report Problem for innotec
Message-ID: <mailman.151.1357938397.25732.innotec-pcs@snf.stanford.edu>

E-beam  focus is seriously out of whack. 



From maurice at snf.stanford.edu  Thu Mar 20 10:50:12 2003
From: maurice at snf.stanford.edu (maurice at snf.stanford.edu)
Date: Mar 20, 2003 10:50:12 AM
Subject: Problem innotec 2003-03-19 19:56:42: Report Clear for innotec
Message-ID: <mailman.152.1357938397.25732.innotec-pcs@snf.stanford.edu>

Beam looks okay, but Au level is low.  This makes it hard to see where the beam is focused.  



From qwang at snf.stanford.edu  Mon Mar 24 02:50:10 2003
From: qwang at snf.stanford.edu (qwang at snf.stanford.edu)
Date: Mar 24, 2003 2:50:10 PM
Subject: Problem innotec 2003-03-24 14:50:09: crystal failure
Message-ID: <mailman.153.1357938397.25732.innotec-pcs@snf.stanford.edu>




From fumin at snf.stanford.edu  Wed Mar 26 09:54:27 2003
From: fumin at snf.stanford.edu (fumin at snf.stanford.edu)
Date: Mar 26, 2003 9:54:27 PM
Subject: Problem innotec 2003-03-26 21:54:24: Report Problem for innotec
Message-ID: <mailman.154.1357938397.25732.innotec-pcs@snf.stanford.edu>

planetary doesn't rotate



From jhaydon at snf.stanford.edu  Thu Mar 27 08:30:27 2003
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Mar 27, 2003 8:30:27 AM
Subject: Problem innotec 2003-03-26 21:54:24: Report Clear for innotec
Message-ID: <mailman.155.1357938397.25732.innotec-pcs@snf.stanford.edu>

planetary is now working 



From jhaydon at snf.stanford.edu  Thu Mar 27 08:32:57 2003
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Mar 27, 2003 8:32:57 AM
Subject: Problem innotec 2003-03-24 14:50:09: Report Clear for innotec
Message-ID: <mailman.156.1357938397.25732.innotec-pcs@snf.stanford.edu>

crystal is working you should make shure it is installed securely before you lower the bell jar